HardLabs

Open source BMS

Teslafly·Dead-OpenBMS-dead·Hardware/Cell manager board V2 12S/old REVs/rev 0.1/Open source BMS.kicad_pcb

Open source BMS PCB layout, top view — open source board by Teslafly

About the Open source BMS PCB

Open source BMS is an open source PCB design by Teslafly, published on GitHub. It is a 2-layer board measuring 49 × 49 mm, with 52 components from 16 distinct parts.

Other key parts include the ATA6870N_BMS. By type, the board carries 24 resistors, 10 capacitors, 6 transistors, 6 diodes, 4 connectors and 1 IC.

It belongs with the power & battery designs in this gallery.

From the project

A scalable, open source battery management system

THIS PROJECT IS DEAD. The avalibility of other projects and low cost off the shelf solutions has imporved significantly to where this project is no londer needed.

A much more mature open source bms that I recommend is https://github.com/EnnoidMe/ENNOID-BMS that has all the features that I had wanted to implement. Off the shelf hardware is available for that too if you don't want to build your own.

Open source BMS, from the project README
From the project README

Main components on the Open source BMS

ATA6870N_BMS

Open source BMS bill of materials (BOM)

52 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATA6870N_BMS
U1
6
BSS138
Q1, Q2, Q3, Q4, Q5, Q6
1
CONN_01X07
P1
1
EXT-TMP
P2
2
CONN_01X09
P3, P4
1
THERMISTOR
TH1
6
LED
D1, D2, D3, D4, D5, D6
8
100nF
C1, C2, C3, C4, C5, C6, C7, C8
1
10uF PolC
C9
1
33uF PolC
C10
6
10Ω
R1, R2, R3, R4, R5, R6
6
100Ω
R7, R8, R9, R10, R11, R12
7
1KΩ
R13, R14, R15, R16, R17, R18, R19
2
10Ω
R20, R21
1
121KΩ
R22
2
10KΩ
R23, R24

Open source BMS design files

The KiCad project lives in the Teslafly/Dead-OpenBMS-dead repository on GitHub; these links point at the commit this page was built from.

Open source BMS: common questions

How big is the Open source BMS PCB?

The Open source BMS measures 49 × 49 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Open source BMS?

52 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Open source BMS design files?

From the Teslafly/Dead-OpenBMS-dead repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Open source BMS design in my own project?

The repository has no license, so all rights stay with Teslafly. Use it as a reference, and ask the author before reusing the design.

More boards in Dead-OpenBMS-dead

Similar boards