Soldered-Breadboard power supply board hardware design
test-gh-syncer2·Soldered-Breadboard-power-supply-board-hardware-design·CAD/V1.0.0/Breadboard_power_supply.kicad_pcb
About the Soldered-Breadboard power supply board hardware design
Soldered-Breadboard power supply board hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 27 × 54 mm, with 24 components from 19 distinct parts.
Other key parts include the AS7805ADTR and SE5218. By type, the board carries 5 resistors, 4 relays, 4 diodes, 4 capacitors, 3 switches and 2 ICs.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Breadboard-power-supply-board designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-Breadboard power supply board hardware design
Soldered-Breadboard power supply board hardware design bill of materials (BOM)
24 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AS7805ADTR | AS7805ADTR | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K1 |
| 1 | DC_JACK | DC_JACK | K2 |
| 2 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K3, K4 |
| 1 | SK-3245S-L3-B | SK-3245S-L3-B | S1 |
| 2 | SK-3296S-01-L1 | SWITCH_ON_OFF_ON_3296 | S2, S3 |
| 1 | BAT20J M4_DIODA | M4_DIODA | D1 |
| 1 | M4_DIODA orange | 0402LED | D2 |
| 1 | red | 0402LED | D3 |
| 1 | purple | 0402LED | D4 |
| 2 | 2.2UF 2.2uF | 0603C | C1, C4 |
| 1 | 1UF 1uF | 0603C | C2 |
| 1 | 0.1UF 0.1uF | 0603C | C3 |
| 2 | 5.1K 5.1k | 0603R | R1, R2 |
| 1 | 2K2 100R | 0402R | R3 |
| 1 | 330R | 0402R | R4 |
| 1 | 1k | 0402R | R5 |
Soldered-Breadboard power supply board hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Breadboard-power-supply-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Breadboard power supply board hardware design: common questions
How big is the Soldered-Breadboard power supply board hardware design?
The Soldered-Breadboard power supply board hardware design measures 27 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Breadboard power supply board hardware design?
24 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Breadboard power supply board hardware design design files?
From the test-gh-syncer2/Soldered-Breadboard-power-supply-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Breadboard power supply board hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k