Soldered-Dasduino-LITE-hardware design
test-gh-syncer2·Soldered-Dasduino-LITE-hardware-design·CAD/V1.1.1/Dasduino_LITE.kicad_pcb
About the Soldered-Dasduino-LITE-hardware design PCB
Soldered-Dasduino-LITE-hardware design is an open source AVR/Arduino PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 25.9 × 38 mm, with 45 components from 31 distinct parts.
Its main chip is the ATTINY804, from the AVR/Arduino family. Other key parts include the CH340C, TPS7A2633DRVR and TP4056M. By type, the board carries 12 resistors, 10 capacitors, 7 diodes, 6 relays, 4 ICs and 2 switches.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Dasduino-LITE designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/ .
All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.
Main components on the Soldered-Dasduino-LITE-hardware design
Soldered-Dasduino-LITE-hardware design bill of materials (BOM)
45 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOP-16 | U1 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U2 |
| 1 | TP4056M | TP4056M-MSOP8 | U3 |
| 1 | ATTINY804 | SOIC-14 | U4 |
| 1 | PMOS-SOT-23-3 | SOT-23-3 | Q1 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 1 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP1 |
| 1 | easyC-SMD | easyC-connector | K1 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K2 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K3 |
| 1 | HEADER-UPDI | HEADER-UPDI | K4 |
| 2 | HEADER_MALE_8X1 | HEADER_MALE_8X1 | K5, K6 |
| 2 | YTSA007A0151803B | YTSA007A0151803B | SW1, SW2 |
| 1 | blue | 0402LED | D1 |
| 1 | orange | 0402LED | D2 |
| 1 | purple | 0402LED | D3 |
| 1 | WS2812B-2020 | WS2812B-2020 | D4 |
| 1 | red | 0402LED | D5 |
| 1 | M4_DIODA | M4_DIODA | D6 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BAT20J | SOD-323 | D7 |
| 4 | 0.1UF 0.1uF | 0603C | C1, C2, C9, C10 |
| 4 | 2.2UF 2.2uF | 0603C | C3, C5, C7, C8 |
| 1 | 100NF 100nF | 0603C | C4 |
| 1 | 270PF 270pF | 0603C | C6 |
| 3 | 1k | 0603R | R1, R2, R5 |
| 4 | 2K2 2k2 | 0402R | R3, R4, R6, R12 |
| 2 | 5.1K 5.1k | 0603R | R7, R8 |
| 1 | 10K 10k | 0603R | R10 |
| 1 | 3k | 0603R | R11 |
| 1 | 100K 100k | 0603R | R14 |
Soldered-Dasduino-LITE-hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Dasduino-LITE-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Dasduino-LITE-hardware design: common questions
What microcontroller does the Soldered-Dasduino-LITE-hardware design use?
The Soldered-Dasduino-LITE-hardware design is built around the ATTINY804, from the AVR/Arduino family.
How big is the Soldered-Dasduino-LITE-hardware design PCB?
The Soldered-Dasduino-LITE-hardware design measures 25.9 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Dasduino-LITE-hardware design?
45 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Dasduino-LITE-hardware design design files?
From the test-gh-syncer2/Soldered-Dasduino-LITE-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Dasduino-LITE-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Can I test firmware for the Soldered-Dasduino-LITE-hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k