19 open source boards using the TP4056M

Real designs built with the TP4056M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the TP4056M

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the TP4056M connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a capacitor to GND on 14 of 14 designs, most often 2.2 µF (then 100 nF).
  • The CHRG pin has a series resistor on 14 of 14 designs, most often 2.2 kΩ.
  • The CE pin has a capacitor to GND on 14 of 14 designs, most often 2.2 µF (then 100 nF).
  • The BAT pin has a decoupling capacitor on 13 of 14 designs, most often 2.2 µF.
TEMPpin 1Connected to: GND 71% · a signal 29%
PROGpin 2Connected to: Signal 100%
  • Resistor to GND on 71% · 3 kΩ (10)
GNDpin 3Connected to: GND 100%
VCCpin 4Connected to: CH340C 71%
  • Capacitor to GND on 100% · 2.2 µF (13), 100 nF (10)
  • Resistor to GND on 71% · 100 kΩ (10)
  • Series resistor on 71% · 2.2 kΩ (20)
BATpin 5Connected to: VBAT 100%
  • Decoupling capacitor on 93% · 2.2 µF (13)
STDBYpin 6Connected to: Not connected 100%
CHRGpin 7Connected to: Signal 100%
  • Series resistor on 100% · 2.2 kΩ (14)
CEpin 8Connected to: CH340C 71%
  • Capacitor to GND on 100% · 2.2 µF (13), 100 nF (10)
  • Resistor to GND on 71% · 100 kΩ (10)
  • Series resistor on 71% · 2.2 kΩ (20)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Li ion charger with protection by SolderedElectronics, Dasduino-CONNECTPLUS-hardware design by SolderedElectronics, Dasduino-CORE-hardware design by SolderedElectronics and Dasduino-LITE-hardware design by SolderedElectronics.

The TP4056M in open source designs

The gallery holds 19 open source boards using the TP4056M from 14 GitHub repositories; a typical one measures about 25.9 × 38 mm and carries around 51 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Li ion charger with protection by SolderedElectronics.

Microcontrollers on boards using the TP4056M

What boards using the TP4056M are built for

TP4056M: common questions

Where can I find a TP4056M reference design?

Each of the 19 boards on this page is a real design using the TP4056M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TP4056M VCC pin connected?

The VCC pin has a capacitor to GND on 14 of 14 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the TP4056M.

What resistor goes on the TP4056M CHRG pin?

The CHRG pin has a series resistor on 14 of 14 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 14 open source designs using the TP4056M.

How is the TP4056M CE pin connected?

The CE pin has a capacitor to GND on 14 of 14 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the TP4056M.

What parts are used alongside the TP4056M?

The CH340C, TPS7A2633DRVR, NMOS-DUAL, ATMEGA_328P and ESP32-WROVER appear in the most repositories here.

Which microcontrollers do boards using the TP4056M use?

Most are built on AVR/Arduino (7), ESP8266 (4) and ESP32 (2).

How big is a typical board using the TP4056M?

The median is 25.9 × 38 mm, and 100% are two-layer designs.

What is the most popular open source board using the TP4056M?

By GitHub stars, Li ion charger with protection by SolderedElectronics, with 5 stars.

Can I simulate one of these boards using the TP4056M before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part