Soldered-Fuel gauge-BQ27441-breakout hardware design
test-gh-syncer2·Soldered-Fuel-gauge-BQ27441-breakout-hardware-design·CAD/V1.0.0/Fuel_gauge_BQ27441.kicad_pcb
About the Soldered-Fuel gauge-BQ27441-breakout hardware design
Soldered-Fuel gauge-BQ27441-breakout hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 27 components from 17 distinct parts.
Other key parts include the BQ27441, NMOS-DUAL and SE5218. By type, the board carries 8 resistors, 6 relays, 4 jumpers, 4 capacitors and 3 ICs.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Fuel-gauge-BQ27441-breakout designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-Fuel gauge-BQ27441-breakout hardware design
Soldered-Fuel gauge-BQ27441-breakout hardware design bill of materials (BOM)
27 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ27441 | BQ27441 | U1 |
| 1 | NMOS-DUAL | SOT-363 | U2 |
| 1 | SE5218 | SOT-23-5 | U3 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP3 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP4 |
| 1 | HEADER_MALE_1X1 | HEADER_MALE_1X1 | K1 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K2 |
| 1 | TERMINAL_KF235-5.0-2P | TERMINAL_KF235-5.0-2P | K3 |
| 2 | easyC-SMD | easyC-connector | K4, K5 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K6 |
| 2 | 1u | 0603C | C1, C2 |
| 2 | 2.2UF 2.2uF | 0603C | C3, C4 |
| 6 | 10K 10k | 0603R | R1, R2, R3, R4, R5, R8 |
| 1 | 0.010R | 1206R | R6 |
| 1 | 1.8M | 0603R | R7 |
Soldered-Fuel gauge-BQ27441-breakout hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Fuel-gauge-BQ27441-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Fuel gauge-BQ27441-breakout hardware design: common questions
How big is the Soldered-Fuel gauge-BQ27441-breakout hardware design?
The Soldered-Fuel gauge-BQ27441-breakout hardware design measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Fuel gauge-BQ27441-breakout hardware design?
27 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Fuel gauge-BQ27441-breakout hardware design design files?
From the test-gh-syncer2/Soldered-Fuel-gauge-BQ27441-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Fuel gauge-BQ27441-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k