Hall effect sensor analog

test-gh-syncer2·Soldered-Hall-effect-sensor-breakout-with-analog-output-hardware-design·CAD/V1.1.1/Hall_effect_sensor_analog.kicad_pcb

Hall effect sensor analog PCB layout, top view — open source board by test-gh-syncer2

About the Hall effect sensor analog PCB

Hall effect sensor analog is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 5 components from 4 distinct parts.

Other key parts include the SI7211-B-00-IV. By type, the board carries 1 IC, 1 relay and 1 capacitor.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Hall-effect-sensor-breakout-with-analog-output designed by Soldered.

Find XXXXXXXX on our [web store](https://solde.red/ .

All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.

Main components on the Hall effect sensor analog

Hall effect sensor analog bill of materials (BOM)

5 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SI7211-B-00-IV
U1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_3X1
K1
1
0.1UF
0.1uF
C1

Hall effect sensor analog design files

The KiCad project lives in the test-gh-syncer2/Soldered-Hall-effect-sensor-breakout-with-analog-output-hardware-design repository on GitHub; these links point at the commit this page was built from.

Hall effect sensor analog: common questions

How big is the Hall effect sensor analog PCB?

The Hall effect sensor analog measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hall effect sensor analog?

5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hall effect sensor analog design files?

From the test-gh-syncer2/Soldered-Hall-effect-sensor-breakout-with-analog-output-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hall effect sensor analog design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

More boards in Soldered-Hall-effect-sensor-breakout-with-analog-output-hardware-design

Similar boards