8 open source boards using the SI7211-B-00-IV
Real designs built with the SI7211-B-00-IV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Hall effect sensor
SolderedElectronics
22 × 22 mm5 parts2LTAPR-OHL-1.02AVR/Arduino
NamePlate
scottalmond
254 × 40.6 mm119 parts2LNo license1AVR/Arduino
Hall effect sensor easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.00Hall effect sensor
test-gh-syncer2
22 × 22 mm5 parts2LTAPR-OHL-1.00Hall effect sensor analog
SolderedElectronics
22 × 22 mm5 parts2LTAPR-OHL-1.02AVR/Arduino
Hall effect sensor analog easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.01AVR/Arduino
Hall effect sensor analog easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.00Hall effect sensor analog
test-gh-syncer2
22 × 22 mm5 parts2LTAPR-OHL-1.00
How designs wire the SI7211-B-00-IV
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SI7211-B-00-IV connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: VCC 100% |
|
| GNDpin 3 | Connected to: GND 80% · a signal 20% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hall effect sensor by SolderedElectronics, NamePlate by scottalmond, Hall effect sensor easyC by SolderedElectronics and Hall effect sensor easyC by SolderedElectronics.
The SI7211-B-00-IV in open source designs
The gallery holds 8 open source boards using the SI7211-B-00-IV from 5 GitHub repositories; a typical one measures about 22 × 22 mm and carries around 9 components.
100% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is Hall effect sensor by SolderedElectronics.
Parts used alongside the SI7211-B-00-IV
Microcontrollers on boards using the SI7211-B-00-IV
What boards using the SI7211-B-00-IV are built for
SI7211-B-00-IV: common questions
Where can I find a SI7211-B-00-IV reference design?
Each of the 8 boards on this page is a real design using the SI7211-B-00-IV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SI7211-B-00-IV VDD pin?
The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SI7211-B-00-IV.
Which microcontrollers do boards using the SI7211-B-00-IV use?
Most are built on AVR/Arduino (4).
How big is a typical board using the SI7211-B-00-IV?
The median is 22 × 22 mm, and 100% are two-layer designs.
What is the most popular open source board using the SI7211-B-00-IV?
By GitHub stars, Hall effect sensor by SolderedElectronics, with 2 stars.
Can I simulate one of these boards using the SI7211-B-00-IV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.