Soldered-Laser distance sensor-VL53L1C-breakout hardware design
test-gh-syncer2·Soldered-Laser-distance-sensor-VL53L1C-breakout-hardware-design·CAD/V1.0.0/Laser_distance_sensor_VL53L1X.kicad_pcb
About the Soldered-Laser distance sensor-VL53L1C-breakout hardware design
Soldered-Laser distance sensor-VL53L1C-breakout hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 22 components from 13 distinct parts.
Other key parts include the NMOS-DUAL, VL53L1X and SE5218. By type, the board carries 6 resistors, 4 jumpers, 4 relays, 3 ICs and 3 capacitors.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Laser-distance-sensor-VL53L1C-breakout designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-Laser distance sensor-VL53L1C-breakout hardware design
Soldered-Laser distance sensor-VL53L1C-breakout hardware design bill of materials (BOM)
22 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NMOS-DUAL | SOT-363 | U1 |
| 1 | VL53L1X | VL53L1X | U2 |
| 1 | SE5218 | SOT-23-5 | U3 |
| 2 | HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 2 | SMD_JUMPER_3_PAD_TRACE | SMD_JUMPER_3_PAD_TRACE | JP1, JP2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP3 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP4 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K1 |
| 2 | easyC-SMD | easyC-connector | K3, K4 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K5 |
| 2 | 2.2uF | 0603C | C1, C3 |
| 1 | 100n | 0603C | C2 |
| 6 | 10K | 0603R | R1, R2, R3, R4, R5, R6 |
Soldered-Laser distance sensor-VL53L1C-breakout hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Laser-distance-sensor-VL53L1C-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Laser distance sensor-VL53L1C-breakout hardware design: common questions
How big is the Soldered-Laser distance sensor-VL53L1C-breakout hardware design?
The Soldered-Laser distance sensor-VL53L1C-breakout hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Laser distance sensor-VL53L1C-breakout hardware design?
22 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Soldered-Laser distance sensor-VL53L1C-breakout hardware design design files?
From the test-gh-syncer2/Soldered-Laser-distance-sensor-VL53L1C-breakout-hardware-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Soldered-Laser distance sensor-VL53L1C-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k