Soldered-Li ion charger hardware design

test-gh-syncer2·Soldered-Li-ion-charger-hardware-design·CAD/V1.1.1/LI-ION_Charger.kicad_pcb

Soldered-Li ion charger hardware design PCB layout, top view — open source board by test-gh-syncer2

About the Soldered-Li ion charger hardware design PCB

Soldered-Li ion charger hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 25 components from 16 distinct parts.

Other key parts include the TP4056M. By type, the board carries 7 relays, 6 resistors, 3 jumpers, 2 diodes, 2 capacitors and 1 IC.

It belongs with the power & battery designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Li-ion-charger designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Soldered-Li ion charger hardware design

Soldered-Li ion charger hardware design bill of materials (BOM)

25 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4056M
U1
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
1
SMD_JUMPER
JP1
1
SMD-JUMPER-CONNECTED
JP2
1
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP3
1
U262-161N-4BVC11
K1
5
HEADER_MALE_1X1
K2, K3, K4, K5, K6
1
JST-2PIN-SMD
JST-2pin-SMD
K7
1
red
D1
1
purple
D2
2
2.2UF
2.2uF
C1, C2
2
5.1K
5.1k
R1, R2
1
4.7K
4.7k
R3
1
2K49
2k49
R4
1
100R
2k2
R5
1
330R
2k2
R6

Soldered-Li ion charger hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-Li-ion-charger-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-Li ion charger hardware design: common questions

How big is the Soldered-Li ion charger hardware design PCB?

The Soldered-Li ion charger hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-Li ion charger hardware design?

25 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-Li ion charger hardware design design files?

From the test-gh-syncer2/Soldered-Li-ion-charger-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-Li ion charger hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Similar boards