Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design
test-gh-syncer2·Soldered-Load-cell-ampfilier-HX711-board-with-easy-C-hardware-design·CAD/V1.0.0/HX711_breakout_easyC.kicad_pcb
About the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design
Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design is an open source AVR/Arduino PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 25 components from 17 distinct parts.
Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the HX711. By type, the board carries 7 capacitors, 6 relays, 6 resistors, 2 ICs, 1 transistor and 1 inductor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Load-cell-ampfilier-HX711-board-with-easy-C designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design
Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design bill of materials (BOM)
25 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HX711 | SOP-16 | U1 |
| 1 | ATTINY404-SSNR | SOIC-14 | U2 |
| 1 | MMBT4403 | SOT-23-3 | Q1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_5X1 | HEADER_MALE_5X1 | K1 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K2 |
| 2 | easyC-SMD | easyC-connector | K3, K5 |
| 1 | HEADER-UPDI | HEADER-UPDI | K4 |
| 1 | DSHP03TS-S | DSHP03TS-S | K6 |
| 1 | 3.3uH | 0603L | L1 |
| 4 | 100NF 100nF | 0603C | C1, C3, C4, C5 |
| 2 | 10UF 10uF | 1206C | C2, C6 |
| 1 | 0.1UF 0.1uF | 0603C | C7 |
| 2 | 100R | 0603R | R1, R2 |
| 1 | 20K 20k | 0603R | R3 |
| 1 | 8.2K 8.2k | 0603R | R4 |
| 2 | 10K 10k | 0603R | R5, R6 |
Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Load-cell-ampfilier-HX711-board-with-easy-C-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design: common questions
What microcontroller does the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design use?
The Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.
How big is the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design?
The Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design?
25 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design design files?
From the test-gh-syncer2/Soldered-Load-cell-ampfilier-HX711-board-with-easy-C-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Can I test firmware for the Soldered-Load cell ampfilier-HX711-board with easy-C-hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k