Soldered microSD-breakout hardware design
test-gh-syncer2·Soldered-microSD-breakout-hardware-design·CAD/V1.0.0/Micro-SD_breakout.kicad_pcb
About the Soldered microSD-breakout hardware design
Soldered microSD-breakout hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 16 components from 12 distinct parts.
Other key parts include the SE5218 and TXB0104QPWRQ1. By type, the board carries 7 capacitors, 2 ICs, 2 jumpers, 2 relays and 1 resistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for microSD-breakout designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/SKU]. !!! TODO
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered microSD-breakout hardware design
Soldered microSD-breakout hardware design bill of materials (BOM)
16 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SE5218 | SOT-23-5 | U1 |
| 1 | TXB0104QPWRQ1 | TXB0104QPWRQ1 | U2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP2 |
| 1 | HYC77-TF09-200 | HYC77-TF09-200 | K1 |
| 1 | HEADER_MALE_6X1 | HEADER_MALE_6X1 | K2 |
| 1 | 2U2 2u2 | 0603C | C1 |
| 2 | 100N 100n | 0603C | C2, C3 |
| 2 | 2.2UF 2.2uF | 0603C | C4, C5 |
| 2 | 0.1UF 0.1uF | 0603C | C6, C7 |
| 1 | 10K 10k | 0603R | R1 |
Soldered microSD-breakout hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-microSD-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered microSD-breakout hardware design: common questions
How big is the Soldered microSD-breakout hardware design?
The Soldered microSD-breakout hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered microSD-breakout hardware design?
16 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered microSD-breakout hardware design design files?
From the test-gh-syncer2/Soldered-microSD-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered microSD-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979