10 open source boards using the TXB0104QPWRQ1

Real designs built with the TXB0104QPWRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TXB0104QPWRQ1

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TXB0104QPWRQ1 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 2.2 µF).
  • The VCCB pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF.
  • The OE pin has a pull-up to 3.3V on 5 of 8 designs, most often 10 kΩ.
VCCApin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (8), 2.2 µF (1)
NCpin 6, 9Connected to: Not connected 100%
GNDpin 7Connected to: GND 100%
OEpin 8Connected to: Signal 88%
  • Pull-up to 3.3V on 63% · 10 kΩ (5)
VCCBpin 14Connected to: VCC 100%
  • Decoupling capacitor on 100% · 100 nF (9)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hestia by mawson-rovers, MicroSD-card reader breakout hardware design by SolderedElectronics, MicroSD-breakout hardware design by SolderedElectronics and Dasduino COREPLUS by SolderedElectronics.

The TXB0104QPWRQ1 in open source designs

The gallery holds 10 open source boards using the TXB0104QPWRQ1 from 8 GitHub repositories; a typical one measures about 38 × 46 mm and carries around 25 components.

90% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Hestia by mawson-rovers.

Parts used alongside the TXB0104QPWRQ1

Microcontrollers on boards using the TXB0104QPWRQ1

TXB0104QPWRQ1: common questions

Where can I find a TXB0104QPWRQ1 reference design?

Each of the 10 boards on this page is a real design using the TXB0104QPWRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXB0104QPWRQ1 VCCA pin?

The VCCA pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the TXB0104QPWRQ1.

What decoupling capacitors do designs use on the TXB0104QPWRQ1 VCCB pin?

The VCCB pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the TXB0104QPWRQ1.

What pull-up resistor is used on the TXB0104QPWRQ1 OE pin?

The OE pin has a pull-up to 3.3V on 5 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the TXB0104QPWRQ1.

Which microcontrollers do boards using the TXB0104QPWRQ1 use?

Most are built on AVR/Arduino (2) and TI MSP430/CC (1).

How big is a typical board using the TXB0104QPWRQ1?

The median is 38 × 46 mm, and 90% are two-layer designs.

What is the most popular open source board using the TXB0104QPWRQ1?

By GitHub stars, Hestia by mawson-rovers, with 3 stars.

Can I simulate one of these boards using the TXB0104QPWRQ1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part