Soldered-Obstacle sensor with easyC-hardware design

test-gh-syncer2·Soldered-Obstacle-sensor-with-easyC-hardware-design·CAD/V1.0.0/Obstacle_sensor_easyC.kicad_pcb

Soldered-Obstacle sensor with easyC-hardware design PCB layout, top view — open source AVR/Arduino board by test-gh-syncer2

About the Soldered-Obstacle sensor with easyC-hardware design PCB

Soldered-Obstacle sensor with easyC-hardware design is an open source AVR/Arduino PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 20 components from 13 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the TCRT5000L and LM393. By type, the board carries 7 resistors, 4 relays, 3 ICs, 3 capacitors and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Obstacle-sensor-with-easyC designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Soldered-Obstacle sensor with easyC-hardware design

Soldered-Obstacle sensor with easyC-hardware design bill of materials (BOM)

20 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TCRT5000L
tcrt5000L
U1
1
LM393
U2
1
ATTINY404-SSNR
U3
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
2
easyC-SMD
K1, K3
1
HEADER-UPDI
K2
1
DSHP03TS-S
K4
1
purple
D1
3
0.1UF
0.1uF
C1, C2, C3
1
TC33X-2-103E
tc33x-2-103e
R1
1
1k
R2
4
10K
10k
R3, R4, R6, R7
1
1k
R5

Soldered-Obstacle sensor with easyC-hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-Obstacle-sensor-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-Obstacle sensor with easyC-hardware design: common questions

What microcontroller does the Soldered-Obstacle sensor with easyC-hardware design use?

The Soldered-Obstacle sensor with easyC-hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Soldered-Obstacle sensor with easyC-hardware design PCB?

The Soldered-Obstacle sensor with easyC-hardware design measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-Obstacle sensor with easyC-hardware design?

20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-Obstacle sensor with easyC-hardware design design files?

From the test-gh-syncer2/Soldered-Obstacle-sensor-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-Obstacle sensor with easyC-hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Can I test firmware for the Soldered-Obstacle sensor with easyC-hardware design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards