Soldered-USB-UART-FT232L-hardware design
test-gh-syncer2·Soldered-USB-UART-FT232L-hardware-design·CAD/V1.0.0/USB-UART_FT232L_converter_board.kicad_pcb
About the Soldered-USB-UART-FT232L-hardware design PCB
Soldered-USB-UART-FT232L-hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 26 components from 19 distinct parts.
Other key parts include the FT_232RL and SE5218. By type, the board carries 5 capacitors, 5 resistors, 4 relays, 3 diodes, 2 ICs and 1 fuse.
It belongs with the usb & debug tools designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for USB-UART_FT232L designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-USB-UART-FT232L-hardware design
Soldered-USB-UART-FT232L-hardware design bill of materials (BOM)
26 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT_232RL | FT232RL | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 1 | 1206FUSE-500mA | 1206FUSE | F1 |
| 4 | HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K1 |
| 2 | HEADER_MALE_9X1 | HEADER_MALE_9X1 | K2, K3 |
| 1 | FTDI_HEADER | HEADER_MALE_6X1 | K4 |
| 1 | PN_ SK-3296S-01-L1 | SWITCH_ON_OFF_ON_3296 | S1 |
| 1 | white | 0402LED | D1 |
| 1 | blue | 0402LED | D2 |
| 1 | purple | 0402LED | D3 |
| 2 | 2.2uF | 0603C | C1, C3 |
| 1 | 100nF | 0603C | C2 |
| 1 | 10uF | 1206C | C4 |
| 1 | 0.1uF | 0603C | C5 |
| 2 | 5.1k | 0603R | R1, R2 |
| 2 | 100R | 0603R | R3, R4 |
| 1 | 2k2 | 0402R | R5 |
Soldered-USB-UART-FT232L-hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-USB-UART-FT232L-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-USB-UART-FT232L-hardware design: common questions
How big is the Soldered-USB-UART-FT232L-hardware design PCB?
The Soldered-USB-UART-FT232L-hardware design measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-USB-UART-FT232L-hardware design?
26 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Soldered-USB-UART-FT232L-hardware design design files?
From the test-gh-syncer2/Soldered-USB-UART-FT232L-hardware-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Soldered-USB-UART-FT232L-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389