Soldered-WiFi bit hardware design
test-gh-syncer2·Soldered-WiFi-bit-hardware-design·CAD/V1.1.1/WiFi_bit.kicad_pcb
About the Soldered-WiFi bit hardware design PCB
Soldered-WiFi bit hardware design is an open source ESP8266 PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 70 mm, with 30 components from 18 distinct parts.
Its main chip is the ESP8266(ESP12-F), from the ESP8266 family. Other key parts include the SE5218. By type, the board carries 10 resistors, 6 relays, 4 capacitors, 3 jumpers, 2 ICs and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for WiFi-bit designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/SKU]. !!! TODO
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-WiFi bit hardware design
Soldered-WiFi bit hardware design bill of materials (BOM)
30 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP8266(ESP12-F) | ESP 8266(ESP12-F) | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 2 | SMD-JUMPER-CONNECTED | SMD_JUMPER_CONNECTED | JP1, JP2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP3 |
| 2 | easyC-SMD | easyC-connector | K1, K2 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K3 |
| 1 | HEADER_MALE_14X1 | HEADER_MALE_14X1 | K4 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K5 |
| 1 | MIC127-140-002 | MC127-140-002 | K6 |
| 1 | purple | 0402LED | D1 |
| 1 | 10UF 10uF | 1206C | C1 |
| 1 | 100NF 100nF | 0603C | C2 |
| 2 | 2.2UF 2.2uF | 0603C | C3, C4 |
| 6 | 10K 10k | 0603R | R1, R2, R3, R4, R5, R6 |
| 1 | 2K49 2k49 | 0603R | R7 |
| 1 | 2K2 2k2 | 0402R | R8 |
| 2 | 5.1K 5.1k | 0603R | R9, R10 |
Soldered-WiFi bit hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-WiFi-bit-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-WiFi bit hardware design: common questions
What microcontroller does the Soldered-WiFi bit hardware design use?
The Soldered-WiFi bit hardware design is built around the ESP8266(ESP12-F), from the ESP8266 family.
How big is the Soldered-WiFi bit hardware design PCB?
The Soldered-WiFi bit hardware design measures 38 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-WiFi bit hardware design?
30 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-WiFi bit hardware design design files?
From the test-gh-syncer2/Soldered-WiFi-bit-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-WiFi bit hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Can I test firmware for the Soldered-WiFi bit hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398