Main

TFEPhoenix·2026-ECSE-design-comp·hardware/MainPCB/MainPCB.kicad_pcb

Main PCB layout, top view — open source RP2040/RP2350 board by TFEPhoenix

About the Main PCB

Main is an open source RP2040/RP2350 PCB design by TFEPhoenix, published on GitHub. It is a 2-layer board measuring 105.5 × 50 mm, with 36 components from 20 distinct parts.

Its main chip is the RASPBERRY_PI_PICO, from the RP2040/RP2350 family. Other key parts include the ESP32-CAM and LSM6DSO32XTR. By type, the board carries 17 resistors, 5 diodes, 4 connectors, 4 capacitors, 3 ICs and 1 transistor.

From the project

Github repo for the 2026 ECSE design competition.

Main components on the Main

Main bill of materials (BOM)

36 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-CAM
U1
1
RASPBERRY_PI_PICO
U2
1
LSM6DSO32XTR
U3
1
TIP120
Q1
1
CONN_01X05
Conn_01x05
J1
1
CONN_01X02
Conn_01x02
J2
1
CONN_01X03
Conn_01x03
J3
1
USB4125-GF-A_REVA2
J4
1
SW_Push
SW2
1
1N4004
D1
3
IR LED
D7, D8, D9
1
Switch Status LED
D10
1
Solenoid
L1
2
100NF
100nF
C1, C3
1
10UF
10uF
C2
1
0.1UF
0.1uF
C4
3
1k
R1, R3, R10
2
5.1K
5.1k
R2, R4
3
220
R5, R13, R14
9
0
R6, R7, R8, R9, R11, R12, R15, R16 +1

Main design files

The KiCad project lives in the TFEPhoenix/2026-ECSE-design-comp repository on GitHub; these links point at the commit this page was built from.

Main: common questions

What microcontroller does the Main use?

The Main is built around the RASPBERRY_PI_PICO, from the RP2040/RP2350 family.

How big is the Main PCB?

The Main measures 105.5 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main?

36 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Main design files?

From the TFEPhoenix/2026-ECSE-design-comp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Main design in my own project?

The repository has no license, so all rights stay with TFEPhoenix. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in 2026-ECSE-design-comp

Similar boards