23 open source boards using the ESP32-CAM

Real designs built with the ESP32-CAM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the ESP32-CAM

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ESP32-CAM connects to, and the resistors, capacitors and other passives placed on it.

  • The IO15 pins is left unconnected on 5 of 6 designs.
  • The IO0 pins is left unconnected on 5 of 6 designs.
  • The U0T pins is left unconnected on 5 of 6 designs.
  • The GPIO2 pin is left unconnected on 5 of 5 designs.
IO4pin 1, IO4Connected to: Not connected 67% · GND 17% · a signal 17%
IO2pin 2, IO2Connected to: Not connected 67% · a signal 33%
IO14pin 3, IO14Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 10 kΩ (2), 0 Ω (1)
IO15pin 4, IO15Connected to: Not connected 83% · a signal 17%
IO12pin 6, IO12Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 0 Ω (2), 2 MΩ (1)
IO16pin 10, IO16Connected to: Not connected 67% · GND 17% · a signal 17%
IO0pin 11, IO0Connected to: Not connected 83% · a signal 17%
U0Rpin 14, U0RConnected to: Not connected 67% · a signal 33%
U0Tpin 15, U0TConnected to: Not connected 83% · a signal 17%
GNDpin GNDConnected to: GND 75% · not connected 25%
GND2pin GND2Connected to: GND 75% · not connected 25%
GND@1pin P$1Connected to: GND 40% · 5V 20% · a signal 40%
  • Capacitor to GND on 40% · 10 µF (1), 100 nF (1)
GPIO3pin P$3Connected to: Signal 100%
  • Series resistor on 40% · 100 Ω (1), 220 Ω (1)
3V3/5Vpin P$4Connected to: Not connected 40% · 3.3V 20% · a signal 40%
  • Series resistor on 40% · 100 Ω (1), 220 Ω (1)
GPIO16pin P$7Connected to: Not connected 80% · a signal 20%
GPIO12pin P$11Connected to: Not connected 60% · a signal 40%
GPIO13pin P$12Connected to: Not connected 80% · a signal 20%
GPIO15pin P$13Connected to: Not connected 80% · a signal 20%
GPIO14pin P$14Connected to: Not connected 80% · a signal 20%
GPIO2pin P$15Connected to: Not connected 100%
GPIO4pin P$16Connected to: Not connected 100%
VOUTpin VOUTConnected to: Not connected 100%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sstv backpack by vaugerbird, Cat finder main by ElectronicCats, OBC v1 by Migsster and Payload & COMMS by Amr-H25.

The ESP32-CAM in open source designs

The gallery holds 23 open source boards using the ESP32-CAM from 22 GitHub repositories; a typical one measures about 92.5 × 66.8 mm and carries around 15 components.

100% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is Sstv backpack by vaugerbird.

Microcontrollers on boards using the ESP32-CAM

ESP32-CAM: common questions

Where can I find a ESP32-CAM reference design?

Each of the 23 boards on this page is a real design using the ESP32-CAM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-CAM IO15 pin connected?

The IO15 pins is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 11 open source designs using the ESP32-CAM.

How is the ESP32-CAM IO0 pin connected?

The IO0 pins is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 11 open source designs using the ESP32-CAM.

How is the ESP32-CAM U0T pin connected?

The U0T pins is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 11 open source designs using the ESP32-CAM.

What parts are used alongside the ESP32-CAM?

The DM-OLED096-636, ESP32-DEVKIT-V1, TB6612FNG, ADS1115IDGS and NEO-6M-GPS appear in the most repositories here.

Which microcontrollers do boards using the ESP32-CAM use?

Most are built on ESP32 (21) and RP2040/RP2350 (2).

How big is a typical board using the ESP32-CAM?

The median is 92.5 × 66.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the ESP32-CAM?

By GitHub stars, Sstv backpack by vaugerbird, with 95 stars.

Can I simulate one of these boards using the ESP32-CAM before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part