Hexapod
TH4R4V3N1324·Hexapod·embedded/schematic/hexapod/Hexapod.kicad_pcb
About the Hexapod PCB
Hexapod is an open source ESP32 PCB design by TH4R4V3N1324, published on GitHub. It is a 2-layer board measuring 61.9 × 45.5 mm, with 15 components from 13 distinct parts.
Its main chip is the ESP32-S3-MINI-1U, from the ESP32 family. Other key parts include the BQ24610, BQ76920PW and AMS1117-3.3. By type, the board carries 6 capacitors, 4 ICs, 4 resistors and 1 connector.
It belongs with the robotics & motion and iot & wireless designs in this gallery.
From the project
This repository contains the complete design, control software and documentation for a six-legged walking robot (hexapod). The project combines robotics, kinematics, embedded systems, and motion planning to create a stable and adaptable walking platform.
This repository contains the complete design, control software and documentation for a six-legged walking robot (hexapod). The project combines robotics, kinematics, embedded systems, and motion planning to create a stable and adaptable walking platform.
- About - Features - Installation - Hexapod - Receiver & Controller - Usage
This project was developed to address the growing complexity in robotic control systems, where tightly coupled codebases often hinder scalability, debugging, and long-term maintainability. It is designed for developers, researchers, or engineers working with robotic…
Main components on the Hexapod
Hexapod bill of materials (BOM)
15 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1U | ESP32-S2-MINI-1U | U1 |
| 1 | BQ24610 | VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U2 |
| 1 | BQ76920PW | TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | TCJB226M025R0150E 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | TAJA106K016RNJ 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | CL21A226MAQNNNE 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 2 | CC0805KRX7R9BB104 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6 |
| 1 | CL21B105KBFNNNE 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 10k | R_0805_2012Metric | R1 |
| 1 | 100R | R_0805_2012Metric | R2 |
| 2 | 5.1k | R_0805_2012Metric | R3, R4 |
Hexapod design files
The KiCad project lives in the TH4R4V3N1324/Hexapod repository on GitHub; these links point at the commit this page was built from.
Hexapod: common questions
What microcontroller does the Hexapod use?
The Hexapod is built around the ESP32-S3-MINI-1U, from the ESP32 family.
How big is the Hexapod PCB?
The Hexapod measures 61.9 × 45.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hexapod?
15 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hexapod design files?
From the TH4R4V3N1324/Hexapod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hexapod design in my own project?
The repository has no license, so all rights stay with TH4R4V3N1324. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hexapod without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Hexapod
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k