30 open source boards using the ESP32-S3-MINI-1U
Real designs built with the ESP32-S3-MINI-1U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-AI-SmartGlass
jobitjoseph
140.6 × 25.9 mm45 parts2LNo license16ESP32
Sbc allwinner F1C200s
vd-rd
60 × 44 mm105 parts4LNo license7ESP32
CheetoPet
Cheet0sDelet0s
50.2 × 95.2 mm96 parts2LGPL-2.03ESP32
OpenAV
JIBSIL
70.3 × 53.9 mm35 parts2LMIT2ESP32
High-Performance-DAC-system
saketharjun12-boop
226.7 × 138.9 mm173 parts4LNo license1ESP32
TRANCE USB-DMX
Soraxem
44 × 20 mm21 parts2LCERN-OHL-P-2.01ESP32
Esp
akseliahonpera
86 × 75 mm61 parts2LNo license0ESP32
Sensor puck
david072
42.2 × 41.9 mm49 parts2LNo license0ESP32
Navigator
azure-dynamics
65 × 56.5 mm49 parts4LCERN-OHL-S-2.00ESP32
Main control board
StarweaverAudioLabs
80 × 46 mm40 parts2LGPL-3.00ESP32
AIoT BookV1-5
DJ2RF
65.5 × 55.5 mm40 parts2LMIT0ESP32
ESP32
buttonbugs
35 × 35 mm39 parts2LMIT0ESP32
FPVSoundLogger V2
emileletueur
38.5 × 38.5 mm34 parts2LCC-BY-4.00ESP32
Smart fan
ben-willis
109.3 × 80 mm34 parts2LNo license0ESP32
RubberESP32-S3
aviyanp
50 × 50 mm26 parts4LNo license0ESP32
Ducktape
sectersion
65 × 22 mm22 parts2LNo license0ESP32
Devboard
Soraxem
26.4 × 41.7 mm18 parts2LCERN-OHL-P-2.01ESP32
Esp.gnss
akseliahonpera
100 × 100 mm61 parts2LNo license0ESP32
Payload
Daksh-Saksena
40 × 22.5 mm15 parts2LMIT0ESP32
SoM V2
robotique-udes
30 × 46.1 mm44 parts4LGPL-2.01ESP32
Esp.imu pcb v1
akseliahonpera
100 × 100 mm61 parts2LNo license0ESP32
Hexapod
TH4R4V3N1324
61.9 × 45.5 mm15 parts2LNo license0ESP32
WK-1
zOnlyKroks
49.9 × 99.8 mm89 parts4LCC0-1.00ESP32
Powersupply
akseliahonpera
100 × 100 mm61 parts2LNo license0ESP32
MIDAS MK2.1
ISSUIUC
45 × 100 mm186 parts4LNo license31ESP32
MIDAS Mini MK1
ISSUIUC
25 × 80 mm122 parts4LNo license31ESP32
FM-Radio
zOnlyKroks
49.4 × 57.2 mm64 parts4LCC0-1.00ESP32
Stargazer Camera Board MK2.1
ISSUIUC
40 × 40 mm108 parts4LNo license31ESP32
MotorBoard MK1
ISSUIUC
65 × 70 mm59 parts4LNo license31ESP32
Feather Duo
ISSUIUC
40 × 40 mm39 parts4LNo license31
How designs wire the ESP32-S3-MINI-1U
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the ESP32-S3-MINI-1U connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 16 of 20 designs, most often 10 kΩ (then 20 kΩ).
- The EN pin has a capacitor to GND on 15 of 20 designs, most often 100 nF (then 1 µF).
- The 3V3 pin is tied to 3.3V on 16 of 20 designs (a signal on 4).
- The IO47 pin is left unconnected on 15 of 20 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 42, 43, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65 | Connected to: GND 95% | — |
| 3V3pin 3 | Connected to: 3.3V 80% · a signal 20% | — |
| IO0pin 4 | Connected to: A connector 30% |
|
| IO8pin 12 | Connected to: A connector 30% · not connected 15% |
|
| IO21pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| IO26pin 26 | Connected to: Not connected 70% · a signal 30% | — |
| IO47pin 27 | Connected to: Not connected 75% · a signal 25% | — |
| IO33pin 28 | Connected to: Not connected 65% · a signal 35% | — |
| IO34pin 29 | Connected to: Not connected 60% · a signal 40% | — |
| IO48pin 30 | Connected to: Not connected 70% · a signal 30% | — |
| IO37pin 33 | Connected to: Not connected 60% · a signal 40% | — |
| IO38pin 34 | Connected to: Not connected 60% · a signal 40% | — |
| IO39pin 35 | Connected to: Not connected 65% · a signal 35% | — |
| IO40pin 36 | Connected to: Not connected 65% · a signal 35% | — |
| IO41pin 37 | Connected to: Not connected 65% · a signal 35% | — |
| IO42pin 38 | Connected to: Not connected 60% · a signal 40% | — |
| IO45pin 41 | Connected to: Not connected 70% · a signal 30% | — |
| IO46pin 44 | Connected to: Not connected 70% · a signal 25% | — |
| ENpin 45 | Connected to: A connector 25% |
|
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stargazer Camera Board MK2.1 by ISSUIUC, ESP32-AI-SmartGlass by jobitjoseph, Sbc allwinner F1C200s by vd-rd and CheetoPet by Cheet0sDelet0s.
The ESP32-S3-MINI-1U in open source designs
The gallery holds 30 open source boards using the ESP32-S3-MINI-1U from 21 GitHub repositories; a typical one measures about 55.1 × 52 mm and carries around 47 components.
60% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is MIDAS MK2.1 by ISSUIUC.
Parts used alongside the ESP32-S3-MINI-1U
Microcontrollers on boards using the ESP32-S3-MINI-1U
What boards using the ESP32-S3-MINI-1U are built for
ESP32-S3-MINI-1U: common questions
Where can I find a ESP32-S3-MINI-1U reference design?
Each of the 30 boards on this page is a real design using the ESP32-S3-MINI-1U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-S3-MINI-1U EN pin?
The EN pin has a pull-up to 3.3V on 16 of 20 designs, most often 10 kΩ (then 20 kΩ). Counted from the KiCad layouts of 20 open source designs using the ESP32-S3-MINI-1U.
How is the ESP32-S3-MINI-1U 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 16 of 20 designs (a signal on 4). Counted from the KiCad layouts of 20 open source designs using the ESP32-S3-MINI-1U.
How is the ESP32-S3-MINI-1U IO47 pin connected?
The IO47 pin is left unconnected on 15 of 20 designs (a signal on 5). Counted from the KiCad layouts of 20 open source designs using the ESP32-S3-MINI-1U.
What parts are used alongside the ESP32-S3-MINI-1U?
The AMS1117-3.3, AP2112K-3.3, BNO086 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-S3-MINI-1U use?
Most are built on ESP32 (30).
How big is a typical board using the ESP32-S3-MINI-1U?
The median is 55.1 × 52 mm, and 60% are two-layer designs.
What is the most popular open source board using the ESP32-S3-MINI-1U?
By GitHub stars, MIDAS MK2.1 by ISSUIUC, with 31 stars.
Can I simulate one of these boards using the ESP32-S3-MINI-1U before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.