HardLabs

Example kicad project

ThanabordeeN·EE-Curcuit-Design-Skills·references/upstream-skidl-examples/netlist_to_skidl/kicad_project/example_kicad_project.kicad_pcb

Example kicad project PCB layout, top view — open source ESP32 board by ThanabordeeN

About the Example kicad project PCB

Example kicad project is an open source ESP32 PCB design by ThanabordeeN, published on GitHub under the MIT license. It is a 2-layer board measuring 45.2 × 53.1 mm, with 18 components from 9 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the NCP1117-3.3_SOT223. By type, the board carries 7 capacitors, 7 resistors, 2 ICs and 2 connectors.

From the project

Agent skills for generating reviewable electronic circuit artifacts using SKiDL, ERC, optional SPICE simulation, and KiCad handoff.

Agent skills for generating reviewable electronic circuit artifacts using SKiDL, ERC, optional SPICE simulation, and KiCad handoff.

This repository is designed for circuit pre-engineering and engineering acceleration, not final production approval.

- Versioned SKiDL source code - Datasheet traceability report - KiCad-compatible netlist - ERC report - KiCad component verification report - Optional SPICE simulation artifacts - Graph/SVG/PNG visualization - Engineering handoff report - Human review checklist

Main components on the Example kicad project

ESP32-S3-MINI-1NCP1117-3.3_SOT223

Example kicad project bill of materials (BOM)

18 components, 9 distinct parts.

QtyPartRefs
1
ESP32-S3-MINI-1
U1
1
NCP1117-3.3_SOT223
U2
1
Conn_02x03_Odd_Even
J1
1
USB_C_Plug_USB2.0
P1
4
10uF
C1, C3, C4, C7
3
100nF
C2, C5, C6
3
1k
R1, R4, R5
3
2k
R2, R3, R6
1
5.1K
R7

Example kicad project design files

The KiCad project lives in the ThanabordeeN/EE-Curcuit-Design-Skills repository on GitHub; these links point at the commit this page was built from.

Example kicad project: common questions

What microcontroller does the Example kicad project use?

The Example kicad project is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the Example kicad project PCB?

The Example kicad project measures 45.2 × 53.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Example kicad project?

18 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Example kicad project design files?

From the ThanabordeeN/EE-Curcuit-Design-Skills repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Example kicad project design in my own project?

Yes, under the terms of its MIT license, which ThanabordeeN chose for the repository.

Can I test firmware for the Example kicad project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in EE-Curcuit-Design-Skills

Similar boards