Project

thanhtuan2503·ControlBoard

Project PCB layout, top view — open source AVR/Arduino board by thanhtuan2503

About the Project PCB

Project is an open source AVR/Arduino PCB design by thanhtuan2503, published on GitHub. It is a 2-layer board measuring 198.1 × 136.9 mm, with 60 components from 43 distinct parts.

Its main chip is the LP2985-33DBVRG4, from the AVR/Arduino family. Other key parts include the LMV358IDGKR, NCP1117ST50T3G, ATMEGA32U4-AUR, ECD_BLOCK and ESC_BLOCK. By type, the board carries 15 resistors, 10 capacitors, 9 ICs, 6 inductors, 4 diodes and 2 transistors.

From the project

Leo, the Arduino Leonardo clone done in KiCad.

Leo, the Arduino Leonardo clone done in KiCad.

https://rheingoldheavy.com/arduino-from-scratch-part-5-selecting-comparator-parts/

- 1 ea., Perfect Purple PCB from OSH Park, with not so perfect layout from kicad.pcb file. - 1 ea., U1 IC REG LINEAR 3.3V 150MA SOT23-5, LP2985-33DBVRG4, https://www.digikey.com/short/j29pqr - 1 ea., U2 IC OPAMP GP 1MHZ RRO 8VSSOP, LM358DGKR, https://www.digikey.com/short/jnd53r - 1 ea., U3 IC REG LINEAR 5V 1A SOT223 NCP1117ST50T3G, https://www.digikey.com/short/j29pqc - 1 ea., U4 ATMEGA32U4-AU, IC MCU 8BIT 32KB FLASH 44TQFP, https://www.digikey.com/short/jb25pc…

Project, from the project README
From the project README

Main components on the Project

LP2985-33DBVRG4LMV358IDGKRNCP1117ST50T3GATMEGA32U4-AURECD_BLOCKESC_BLOCKSERVO_BLOCKCODE_INPUTJTAG

Project bill of materials (BOM)

60 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LP2985-33DBVRG4
ATMEGA32U4-AU
Texas Instruments
U1
1
LMV358IDGKR
AMS1117
Texas Instruments
U2
1
NCP1117ST50T3G
LM2596S
ON Semiconductor
U3
1
ATMEGA32U4-AUR
LINE_BLOCK
Microchip Technology
U4
1
ECD_BLOCK
U5
1
ESC_BLOCK
U6
1
SERVO_BLOCK
U7
1
CODE_INPUT
U8
1
JTAG
U9
1
FDN340P
2N7002
ON Semiconductor
Q1
1
2N7002
Q2
1
USB_OTG
X1
1
16 Mhz
Y1_5535
1
PJ-002A
Conn_01x02_Female
CUI Inc.
J1
1
D_Schottky
1N5824
1
INDUCTOR
33uH1
1
CP1
220uF1
1
CP4
220uF2
1
CP2
220uF3
1
CP3
1000uF1
Show 23 more
QtyPartRefs
1
0ZCJ0025AF2E
Polyfuse
Bel Fuse Inc.
F1
2
VCUG080050L1DP
D_TWS
AVX Corporation
RV1, RV2
1
B3S-1002
RESET
Omron Electronics Inc-EMC Div
SW1
1
SW_Push_DPDT
SW2
1
LTST-C170KFKT
PWR
Lite-On Inc.
D1
2
LTST-C170KFKT
LED
Lite-On Inc.
D2, D3
1
LTST-C170KFKT
SS34
Lite-On Inc.
D4
6
Ferrite
FB1, FB2, FB3, FB4, FB5, FB6
2
CL21A105KAFNNNE
0.1uF
Samsung Electro-Mechanics
C1, C5
1
885012007030
0.1uF
Wurth Electronics Inc.
C2
1
GRM319R6YA106KA12D
10uF
Murata Electronics North America
C3
1
CC0805KRX7R8BB104
0.1uF
Yageo
C4
2
GRM319R6YA106KA12D
0.1uF
Murata Electronics North America
C6, C7
3
0.1uF
C8, C9, C10
1
ERJ-6GEYJ102V
1K
Panasonic Electronic Components
R1
2
ERJ-6GEYJ102V
470
Panasonic Electronic Components
R2, R3
1
ERJ-6GEYJ102V
10k
Panasonic Electronic Components
R4
1
ERJ-6GEYJ103V
1M
Panasonic Electronic Components
R5
2
ESR10EZPJ220
22
Rohm Semiconductor
R6, R7
1
ERJ-6GEYJ103V
10k
Panasonic Electronic Components
R8
1
CRGCQ0603J1M0
22
TE Connectivity Passive Product
R9
4
10K
R10, R11, R13, R15
2
10
R12, R14

Project design files

The KiCad project lives in the thanhtuan2503/ControlBoard repository on GitHub; these links point at the commit this page was built from.

Project: common questions

What microcontroller does the Project use?

The Project is built around the LP2985-33DBVRG4, from the AVR/Arduino family.

How big is the Project PCB?

The Project measures 198.1 × 136.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Project?

60 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Project design files?

From the thanhtuan2503/ControlBoard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Project design in my own project?

The repository has no license, so all rights stay with thanhtuan2503. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in ControlBoard

Similar boards