8 open source boards using the ATMEGA32U4-AUR

Real designs built with the ATMEGA32U4-AUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ATMEGA32U4-AUR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATMEGA32U4-AUR connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 16 has a crystal on 5 of 5 designs, most often 16 MHz.
  • Pin 17 has a crystal on 5 of 5 designs, most often 16 MHz.
  • Pin 5 is tied to GND on 5 of 5 designs.
  • Pin 7 is tied to VBUS on 5 of 5 designs.
Pin 1Connected to: Not connected 80% · a signal 20%
Pin 2Connected to: Not connected 80% · VCC 20%
Pin 3Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 22 Ω (2)
Pin 4Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 22 Ω (2)
Pin 5Connected to: GND 100%
Pin 6Connected to: 5V 80% · a signal 20%
Pin 7Connected to: VBUS 100%
Pin 8Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 4.7 kΩ (1), 200 Ω (1)
Pin 9Connected to: Not connected 60% · a signal 40%
Pin 10Connected to: Not connected 60% · a signal 40%
Pin 11Connected to: Not connected 60% · a signal 40%
Pin 12Connected to: Not connected 60% · a signal 40%
Pin 13Connected to: Not connected 60% · a signal 40%
Pin 14Connected to: 5V 100%
Pin 15Connected to: GND 100%
Pin 16Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (5)
  • Series resistor on 80% · 1 MΩ (4)
Pin 17Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (5)
  • Series resistor on 80% · 1 MΩ (4)
Pin 18Connected to: Not connected 80% · a signal 20%
Pin 19Connected to: Not connected 80% · a signal 20%
Pin 20Connected to: Not connected 60% · a signal 40%
Pin 21Connected to: Not connected 60% · a signal 40%
Pin 22Connected to: Not connected 60% · a signal 40%
Pin 23Connected to: GND 100%
Pin 24Connected to: 5V 100%
  • Decoupling capacitor on 40% · 10 µF (1), 100 nF (1)
Pin 25Connected to: Not connected 80% · a signal 20%
Pin 26Connected to: Not connected 60% · a signal 40%
Pin 27Connected to: Not connected 60% · a signal 40%
Pin 28Connected to: Not connected 60% · a signal 40%
Pin 29Connected to: Not connected 60% · a signal 40%
Pin 30Connected to: Not connected 60% · a signal 40%
Pin 31Connected to: Not connected 80% · a signal 20%
Pin 33Connected to: 5V 60% · a signal 40%
Pin 34Connected to: 5V 100%
Pin 35Connected to: GND 100%
Pin 36Connected to: Not connected 60% · a signal 40%
Pin 37Connected to: Not connected 60% · a signal 40%
Pin 38Connected to: Not connected 60% · a signal 40%
Pin 39Connected to: Not connected 60% · a signal 40%
Pin 40Connected to: Not connected 80% · a signal 20%
Pin 41Connected to: Not connected 60% · a signal 40%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mask by aspro648, Mask by aspro648, Bzzt Keyboard Controller Board by SteveCooling and Balthazar-Keyboard-3 by balthazar-space.

The ATMEGA32U4-AUR in open source designs

The gallery holds 8 open source boards using the ATMEGA32U4-AUR from 5 GitHub repositories; a typical one measures about 68.6 × 53.3 mm and carries around 33 components.

88% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Project by aspro648.

Parts used alongside the ATMEGA32U4-AUR

Microcontrollers on boards using the ATMEGA32U4-AUR

What boards using the ATMEGA32U4-AUR are built for

ATMEGA32U4-AUR: common questions

Where can I find a ATMEGA32U4-AUR reference design?

Each of the 8 boards on this page is a real design using the ATMEGA32U4-AUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATMEGA32U4-AUR pin 16 connected?

Pin 16 has a crystal on 5 of 5 designs, most often 16 MHz. Counted from the KiCad layouts of 5 open source designs using the ATMEGA32U4-AUR.

How is the ATMEGA32U4-AUR pin 17 connected?

Pin 17 has a crystal on 5 of 5 designs, most often 16 MHz. Counted from the KiCad layouts of 5 open source designs using the ATMEGA32U4-AUR.

How is the ATMEGA32U4-AUR pin 5 connected?

Pin 5 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ATMEGA32U4-AUR.

What parts are used alongside the ATMEGA32U4-AUR?

The LMV358IDGKR, LP2985-33DBVRG4 and NCP1117ST50T3G appear in the most repositories here.

Which microcontrollers do boards using the ATMEGA32U4-AUR use?

Most are built on AVR/Arduino (8).

How big is a typical board using the ATMEGA32U4-AUR?

The median is 68.6 × 53.3 mm, and 88% are two-layer designs.

What is the most popular open source board using the ATMEGA32U4-AUR?

By GitHub stars, Project by aspro648, with 12 stars.

Can I simulate one of these boards using the ATMEGA32U4-AUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part