26 open source boards using the LMV358IDGKR

Real designs built with the LMV358IDGKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the LMV358IDGKR

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the LMV358IDGKR connects to, and the resistors, capacitors and other passives placed on it.

  • The V- pin is tied to GND on 15 of 17 designs (a signal on 2).
  • The +IN pins have a pull-up to 5V on 10 of 17 designs, most often 10 kΩ.
  • The V+ pin has a decoupling capacitor on 8 of 17 designs, most often 100 nF.
  • The OUT pins have a series resistor on 7 of 17 designs, most often 1 kΩ.
OUTpin 1, 7Connected to: Signal 79% · not connected 21%
  • Series resistor on 41% · 1 kΩ (7)
+INpin 3, 5Connected to: The microcontroller 38%
  • Pull-up to 5V on 59% · 10 kΩ (10)
  • Capacitor to GND on 41% · 100 nF (7), 22 nF (1)
V-pin 4Connected to: GND 88%
V+pin 8Connected to: 5V 94%
  • Decoupling capacitor on 47% · 100 nF (8)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arduino Leonardo by sabogalc, Arduino MEGA 2560-Rev3 by bobc, Leonardo by eltorio and Mask by aspro648.

The LMV358IDGKR in open source designs

The gallery holds 26 open source boards using the LMV358IDGKR from 18 GitHub repositories; a typical one measures about 68.6 × 53.3 mm and carries around 59 components.

96% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is Arduino Mega 2560 by sabogalc.

Microcontrollers on boards using the LMV358IDGKR

What boards using the LMV358IDGKR are built for

LMV358IDGKR: common questions

Where can I find a LMV358IDGKR reference design?

Each of the 26 boards on this page is a real design using the LMV358IDGKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMV358IDGKR V- pin connected?

The V- pin is tied to GND on 15 of 17 designs (a signal on 2). Counted from the KiCad layouts of 17 open source designs using the LMV358IDGKR.

What pull-up resistor is used on the LMV358IDGKR +IN pin?

The +IN pins have a pull-up to 5V on 10 of 17 designs, most often 10 kΩ. Counted from the KiCad layouts of 17 open source designs using the LMV358IDGKR.

What decoupling capacitors do designs use on the LMV358IDGKR V+ pin?

The V+ pin has a decoupling capacitor on 8 of 17 designs, most often 100 nF. Counted from the KiCad layouts of 17 open source designs using the LMV358IDGKR.

What parts are used alongside the LMV358IDGKR?

The NCP1117ST50T3G, ATMEGA16U2-MU, LP2985-3.3, LP2985-33DBVR and ATMEGA16U2-MU(R) appear in the most repositories here.

Which microcontrollers do boards using the LMV358IDGKR use?

Most are built on AVR/Arduino (26).

How big is a typical board using the LMV358IDGKR?

The median is 68.6 × 53.3 mm, and 96% are two-layer designs.

What is the most popular open source board using the LMV358IDGKR?

By GitHub stars, Arduino Mega 2560 by sabogalc, with 93 stars.

Can I simulate one of these boards using the LMV358IDGKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part