25 open source boards using the NCP1117ST50T3G

Real designs built with the NCP1117ST50T3G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the NCP1117ST50T3G

Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the NCP1117ST50T3G connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 is tied to GND on 21 of 22 designs.
  • Pin 2 is tied to 5V on 21 of 22 designs.
  • Pin 3 has a decoupling capacitor on 13 of 22 designs, most often 10 µF (then 100 µF).
  • Pin 3 is tied to VIN on 14 of 22 designs (a signal on 7).
Pin 1Connected to: GND 95%
Pin 2Connected to: 5V 95%
Pin 3Connected to: VIN 64% · a signal 32%
  • Decoupling capacitor on 59% · 10 µF (5), 100 µF (2), 100 nF (2)
Pin 4Connected to: 5V 69% · not connected 23%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include To220 powerstage by rene-dev, Arduino ads129x by OpenElectronicsLab, Alamode by wyolum and Arduino MEGA 2560-Rev3 by bobc.

The NCP1117ST50T3G in open source designs

The gallery holds 25 open source boards using the NCP1117ST50T3G from 24 GitHub repositories; a typical one measures about 85.1 × 68 mm and carries around 75 components.

78% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.

The most starred is To220 powerstage by rene-dev.

Microcontrollers on boards using the NCP1117ST50T3G

NCP1117ST50T3G: common questions

Where can I find a NCP1117ST50T3G reference design?

Each of the 25 boards on this page is a real design using the NCP1117ST50T3G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NCP1117ST50T3G pin 1 connected?

Pin 1 is tied to GND on 21 of 22 designs. Counted from the KiCad layouts of 22 open source designs using the NCP1117ST50T3G.

How is the NCP1117ST50T3G pin 2 connected?

Pin 2 is tied to 5V on 21 of 22 designs. Counted from the KiCad layouts of 22 open source designs using the NCP1117ST50T3G.

What decoupling capacitors do designs use on the NCP1117ST50T3G pin 3?

Pin 3 has a decoupling capacitor on 13 of 22 designs, most often 10 µF (then 100 µF). Counted from the KiCad layouts of 22 open source designs using the NCP1117ST50T3G.

What parts are used alongside the NCP1117ST50T3G?

The LMV358IDGKR, LP2985-33DBVR, ATMEGA16U2-MU(R), NCP1117ST33T3G and ATMEGA32U4-AUR appear in the most repositories here.

Which microcontrollers do boards using the NCP1117ST50T3G use?

Most are built on AVR/Arduino (16), STM32 (4), Microchip SAM (2) and ESP8266 (1).

How big is a typical board using the NCP1117ST50T3G?

The median is 85.1 × 68 mm, and 78% are two-layer designs.

What is the most popular open source board using the NCP1117ST50T3G?

By GitHub stars, To220 powerstage by rene-dev, with 979 stars.

Can I simulate one of these boards using the NCP1117ST50T3G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part