The-Button-Overfilled-Macropad

the-X-alien·The-Button-Overfilled-Macropad·The-Button-Overfilled-Macropad/PCB/Hackpad.kicad_pcb

The-Button-Overfilled-Macropad PCB layout, top view — open source RP2040/RP2350 board by the-X-alien

About the The-Button-Overfilled-Macropad PCB

The-Button-Overfilled-Macropad is an open source RP2040/RP2350 PCB design by the-X-alien, published on GitHub. It is a 2-layer board measuring 89.7 × 99.9 mm, with 34 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 16 switches, 16 diodes, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

This Dhiaan

I followed the Hackpad tutorial for the first version but after I figured out that 16 GPIO pins are too much I switched to a Matrix tutorial. I followed the tutorial but instead of a 3x3 I made a 4x4. The tutorial also explained how Anti-Ghosting worked so I also added diodes to incorperate the feature.

For the PCB I did it on my own besides the OLED display for which I took help from the Hackpad chat.

The-Button-Overfilled-Macropad, from the project README
From the project README

Main components on the The-Button-Overfilled-Macropad

The-Button-Overfilled-Macropad bill of materials (BOM)

34 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
Conn_01x04_Pin
J1
16
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8
16
1N4148
D3, D4, D5, D6, D7, D8, D9, D11 +8

The-Button-Overfilled-Macropad design files

The KiCad project lives in the the-X-alien/The-Button-Overfilled-Macropad repository on GitHub; these links point at the commit this page was built from.

The-Button-Overfilled-Macropad: common questions

What microcontroller does the The-Button-Overfilled-Macropad use?

The The-Button-Overfilled-Macropad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the The-Button-Overfilled-Macropad PCB?

The The-Button-Overfilled-Macropad measures 89.7 × 99.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the The-Button-Overfilled-Macropad?

34 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the The-Button-Overfilled-Macropad design files?

From the the-X-alien/The-Button-Overfilled-Macropad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the The-Button-Overfilled-Macropad design in my own project?

The repository has no license, so all rights stay with the-X-alien. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the The-Button-Overfilled-Macropad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards