IOT
the-yurco·IOT·8. Návrh plošáku smart ovládač a svetlo./Smart_Light/Smart_Light.kicad_pcb
About the IOT PCB
IOT is an open source ESP32 PCB design by the-yurco, published on GitHub. It is a 2-layer board measuring 29.2 × 52.3 mm, with 23 components from 5 distinct parts.
Its main chip is the ESP32-DevKit-V1, from the ESP32 family. By type, the board carries 11 resistors, 10 diodes, 1 IC and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
Main components on the IOT
IOT bill of materials (BOM)
23 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DevKit-V1 | ESP32-DevKit-V1 | U1 |
| 1 | MMBT2222 | SOT-323_SC-70 | Q1 |
| 10 | LED_WHITE | PLCC2 | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 10 | 91R | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
| 1 | 200R | R_0805_2012Metric | R11 |
IOT design files
The KiCad project lives in the the-yurco/IOT repository on GitHub; these links point at the commit this page was built from.
IOT: common questions
What microcontroller does the IOT use?
The IOT is built around the ESP32-DevKit-V1, from the ESP32 family.
How big is the IOT PCB?
The IOT measures 29.2 × 52.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IOT?
23 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the IOT design files?
From the the-yurco/IOT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IOT design in my own project?
The repository has no license, so all rights stay with the-yurco. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IOT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k