Esc
About the Esc PCB
Esc is an open source PCB design by thebiguno, published on GitHub. It is a 2-layer board measuring 99.1 × 12.7 mm, with 16 components from 11 distinct parts.
By type, the board carries 6 transistors, 2 connectors, 2 capacitors, 2 resistors, 1 IC and 1 diode.
From the project
A home for a bunch of microcontroller projects which don't warrant their own repos.
microcontroller-projects ========================
A home for my microcontroller projects, including Stubby the Hexapod and others. It includes libraries for avr-gcc along with sample programs on how to use them, some KiCad modules, and the source code for a number of projects.
Some major projects include: Stubby the Hexapod (http://stubby.digitalcave.ca/stubby/) (Now extracted into its own repo at https://github.com/thebiguno/stubby) DrumMaster (http://drummaster.digitalcave.ca/drummaster/) * Chiindii (http://chiindii.digitalcave.ca/chiindii/)
Esc bill of materials (BOM)
16 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X20 | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 3 | Q_PMOS_GSD | SOT-23 | Q1, Q3, Q5 |
| 3 | Q_NMOS_GSD | SOT-23 | Q2, Q4, Q6 |
| 1 | CONN_10X2 INPUT | Pin_Header_Straight_2x04 | P1 |
| 1 | OUTPUT | Pin_Header_Straight_1x03 | P2 |
| 2 | MOUNTING_HOLE | MOUNTING_HOLE_#4 | MP1, MP2 |
| 1 | LED | LED-0603 | D1 |
| 1 | C | C_0603 | C1 |
| 1 | CP1 | C_Radial_D5_L6_P2.5 | C2 |
| 1 | R_Small | SM0603_VALUE | R1 |
| 1 | RESISTOR | R_2512 | R2 |
Esc design files
The KiCad project lives in the thebiguno/microcontroller-projects repository on GitHub; these links point at the commit this page was built from.
Esc: common questions
How big is the Esc PCB?
The Esc measures 99.1 × 12.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esc?
16 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esc design files?
From the thebiguno/microcontroller-projects repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Esc design in my own project?
The repository has no license, so all rights stay with thebiguno. Use it as a reference, and ask the author before reusing the design.
More boards in microcontroller-projects
AVR/ArduinoPower Supply (plus UBBB 32u4 rev 1.2)
99.1 × 99.1 mm189 parts2LNo license75
AVR/ArduinoAdjustable Modular Power Supply
36.8 × 52.7 mm183 parts2LNo license75
NXPDrum Master
99.7 × 99.7 mm180 parts2LNo license75
AVR/ArduinoM8
50 × 50 mm154 parts2LNo license75
AVR/ArduinoLine follower
48.3 × 48.3 mm38 parts2LNo license75
AVR/ArduinoUBBB 32u4
20.3 × 41.9 mm34 parts2LNo license75
AVR/ArduinoPanelizing
41.9 × 20.3 mm33 parts2LNo license75
AVR/ArduinoMicrosd append
49.4 × 34.2 mm32 parts2LNo license75
Preamp
15.2 × 10.2 mm17 parts2LNo license75
Microsd
20.3 × 12.7 mm8 parts2LNo license75
Apple WIFI m.2 Adaptor
22 × 80 mm4 parts2LNo license75