HardLabs

Panelizing

thebiguno·microcontroller-projects·projects/panelizing_temp/panelizing.kicad_pcb

Panelizing PCB layout, top view — open source AVR/Arduino board by thebiguno
Simulate this board

About the Panelizing PCB

Panelizing is an open source AVR/Arduino PCB design by thebiguno, published on GitHub. It is a 2-layer board measuring 41.9 × 20.3 mm, with 33 components from 16 distinct parts.

Its main chip is the ATMEGA32U4-A, from the AVR/Arduino family. By type, the board carries 9 capacitors, 8 connectors, 7 resistors, 2 switches, 2 diodes and 1 IC.

From the project

A home for a bunch of microcontroller projects which don't warrant their own repos.

microcontroller-projects ========================

A home for my microcontroller projects, including Stubby the Hexapod and others. It includes libraries for avr-gcc along with sample programs on how to use them, some KiCad modules, and the source code for a number of projects.

Some major projects include: Stubby the Hexapod (http://stubby.digitalcave.ca/stubby/) (Now extracted into its own repo at https://github.com/thebiguno/stubby) DrumMaster (http://drummaster.digitalcave.ca/drummaster/) * Chiindii (http://chiindii.digitalcave.ca/chiindii/)

Main components on the Panelizing

ATMEGA32U4-A

Panelizing bill of materials (BOM)

33 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA32U4-A
U1
1
CRYSTAL_SMD_4PIN
X1
1
USB-MINI-B
CON1
1
CONN_10X2
ISP
P1
6
CONN_5
P2, P3, P4, P5, P6, P7
1
P***
1PIN
1
Val**
PIN_ARRAY_4X1
2
SW_PUSH_SMALL
SW1, SW2
1
VAL**
WJ10
1
RGB_LED_COMMON_ANODE_ALT1
D1
1
TVS
D2
2
8pF
C1, C2
6
0.1uF
C3, C5, C6, C7, C8, C9
1
1uF
C4
2
22
R1, R2
5
1k
R3, R4, R5, R6, R7

Panelizing design files

The KiCad project lives in the thebiguno/microcontroller-projects repository on GitHub; these links point at the commit this page was built from.

Panelizing: common questions

What microcontroller does the Panelizing use?

The Panelizing is built around the ATMEGA32U4-A, from the AVR/Arduino family.

How big is the Panelizing PCB?

The Panelizing measures 41.9 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panelizing?

33 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panelizing design files?

From the thebiguno/microcontroller-projects repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Panelizing design in my own project?

The repository has no license, so all rights stay with thebiguno. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Panelizing without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in microcontroller-projects

Similar boards