TI PCB Antenna
About the TI PCB Antenna
TI PCB Antenna is an open source TI MSP430/CC PCB design by theBrutzler, published on GitHub. It is a 4-layer board measuring 46.9 × 51.6 mm, with 49 components from 15 distinct parts.
Its main chip is the CC3351ENJARSBR, from the TI MSP430/CC family. Other key parts include the FXMA108 and AP62150WU. By type, the board carries 26 capacitors, 9 resistors, 5 inductors, 4 ICs, 2 connectors and 2 antennas.
It belongs with the rf & radio designs in this gallery.
From the project
Next level Brutzelboy, based on RK3566
Main components on the TI PCB Antenna
TI PCB Antenna bill of materials (BOM)
49 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | FXMA108 | WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm | U1, U3 |
| 1 | CC3351ENJARSBR | WQFN-40_L5.0-W5.0-P0.40-TL-EP3.5 | U2 |
| 1 | AP62150WU | TSOT-23-6 | U4 |
| 1 | 40MHZ 40MHz | Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | Y1 |
| 1 | CONN_02X20_ODD_EVEN Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Antenna_Shield | Texas_SWRA117D_2.4GHz_Right | AE1 |
| 1 | Antenna_Shield | Texas_SWRA117D_2.4GHz_Left | AE2 |
| 4 | C356980 60R 100MHz | L_0603_1608Metric | L1, L4, L7, L8 |
| 1 | C53285288 1.8u 4A | L_1008_2520Metric | L9 |
| 14 | C48579281 100n 35V | C_0603_1608Metric | C1, C4, C5, C10, C12, C13, C14, C15 +6 |
| 8 | C7432770 22u 10V | C_0603_1608Metric | C2, C8, C11, C18, C20, C22, C24, C26 |
| 4 | 12P 12p | C_0603_1608Metric | C3, C6, C7, C9 |
| 8 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R9 |
| 1 | 12K4 | R_0603_1608Metric | R8 |
TI PCB Antenna design files
The KiCad project lives in the theBrutzler/BrutzelBoy_V2 repository on GitHub; these links point at the commit this page was built from.
TI PCB Antenna: common questions
What microcontroller does the TI PCB Antenna use?
The TI PCB Antenna is built around the CC3351ENJARSBR, from the TI MSP430/CC family.
How big is the TI PCB Antenna?
The TI PCB Antenna measures 46.9 × 51.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TI PCB Antenna?
49 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TI PCB Antenna design files?
From the theBrutzler/BrutzelBoy_V2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TI PCB Antenna design in my own project?
The repository has no license, so all rights stay with theBrutzler. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TI PCB Antenna without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
More boards in BrutzelBoy_V2
TI MSP430/CCLCSC TaishanPi RK3566
85 × 63.4 mm477 parts6LNo license1
TI MSP430/CCPI PCB Antenna
45.6 × 51.8 mm49 parts4LNo license1
TI MSP430/CCW3078 Antenna
45.6 × 51.8 mm49 parts4LNo license1
TI MSP430/CCM830520 CHIP Antenna
45.6 × 51.8 mm49 parts4LNo license1
TI MSP430/CCADWH004 CHIP Antenna
54.8 × 59.5 mm49 parts4LNo license1
Display Interface Debuger
20.1 × 18.7 mm5 parts4LNo license1
Similar boards
TI MSP430/CCPluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0533
TI MSP430/CCNsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33
TI MSP430/CCCupltag
cuplsensor
54 × 54 mm25 parts2LCustom license16
TI MSP430/CCSTLink-Adapter
grumat
29.2 × 26.7 mm7 parts2LGPL-2.015
TI MSP430/CCTartan Artibeus Control Board
CMUAbstract
45 × 45 mm49 parts4LNo license5
TI MSP430/CCKeithley 17X USB
sdp8483
70.5 × 44 mm38 parts2LMIT3