HardLabs

W3078 Antenna

theBrutzler·BrutzelBoy_V2·Antennen/W3078_Antenna/W3078_Antenna.kicad_pcb

W3078 Antenna PCB layout, top view — open source TI MSP430/CC board by theBrutzler
Simulate this board

About the W3078 Antenna PCB

W3078 Antenna is an open source TI MSP430/CC PCB design by theBrutzler, published on GitHub. It is a 4-layer board measuring 45.6 × 51.8 mm, with 49 components from 14 distinct parts.

Its main chip is the CC3351ENJARSBR, from the TI MSP430/CC family. Other key parts include the FXMA108 and AP62150WU. By type, the board carries 26 capacitors, 9 resistors, 5 inductors, 4 ICs, 2 connectors and 2 antennas.

It belongs with the rf & radio designs in this gallery.

From the project

Next level Brutzelboy, based on RK3566

Main components on the W3078 Antenna

FXMA108CC3351ENJARSBRAP62150WU

W3078 Antenna bill of materials (BOM)

49 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
FXMA108
U1, U3
1
CC3351ENJARSBR
U2
1
AP62150WU
U4
1
40MHZ
40MHz
Y1
1
Conn_02x20_Odd_Even
J1
1
Conn_01x03_Pin
J2
2
Antenna_Shield
AE1, AE2
4
C356980
60R 100MHz
L1, L4, L7, L8
1
C53285288
1.8u 4A
L9
14
C48579281
100n 35V
C1, C4, C5, C10, C12, C13, C14, C15 +6
8
C7432770
22u 10V
C2, C8, C11, C18, C20, C22, C24, C26
4
12P
12p
C3, C6, C7, C9
8
10K
R1, R2, R3, R4, R5, R6, R7, R9
1
12K4
R8

W3078 Antenna design files

The KiCad project lives in the theBrutzler/BrutzelBoy_V2 repository on GitHub; these links point at the commit this page was built from.

W3078 Antenna: common questions

What microcontroller does the W3078 Antenna use?

The W3078 Antenna is built around the CC3351ENJARSBR, from the TI MSP430/CC family.

How big is the W3078 Antenna PCB?

The W3078 Antenna measures 45.6 × 51.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the W3078 Antenna?

49 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the W3078 Antenna design files?

From the theBrutzler/BrutzelBoy_V2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the W3078 Antenna design in my own project?

The repository has no license, so all rights stay with theBrutzler. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the W3078 Antenna without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

More boards in BrutzelBoy_V2

Similar boards