11 open source boards using the AP62150WU
Real designs built with the AP62150WU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TI MSP430/CC
LCSC TaishanPi RK3566
theBrutzler
85 × 63.4 mm477 parts6LNo license1ESP32
Distrabution controler
mickdassive
246 × 110 mm212 parts4LNo license0RP2040/RP2350
Version2
rice-eclipse
50.8 × 87 mm130 parts4LNo license0SimpleCarrier
alexian79
105.6 × 100.9 mm109 parts6LBSD-2-Clause0RP2040/RP2350
Simple-ESC
bluefeng2
80 × 41.8 mm37 parts4LNo license0TI MSP430/CC
ADWH004 CHIP Antenna
theBrutzler
54.8 × 59.5 mm49 parts4LNo license1ESP32
Interface controler
mickdassive
110 × 120 mm109 parts4LNo license0TI MSP430/CC
M830520 CHIP Antenna
theBrutzler
45.6 × 51.8 mm49 parts4LNo license1TI MSP430/CC
PI PCB Antenna
theBrutzler
45.6 × 51.8 mm49 parts4LNo license1TI MSP430/CC
TI PCB Antenna
theBrutzler
46.9 × 51.6 mm49 parts4LNo license1TI MSP430/CC
W3078 Antenna
theBrutzler
45.6 × 51.8 mm49 parts4LNo license1
How designs wire the AP62150WU
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AP62150WU connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 402 nF).
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 22 µF).
- The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 15 kΩ).
- The FB pin has a pull-up to 3.3V on 5 of 5 designs, most often 12.4 kΩ (then 31.6 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| SWpin 2 | Connected to: Signal 100% |
|
| VINpin 3 | Connected to: VIN 60% · a signal 40% |
|
| FBpin 4 | Connected to: Signal 100% |
|
| BSTpin 6 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADWH004 CHIP Antenna by theBrutzler, SimpleCarrier by alexian79, Simple-ESC by bluefeng2 and Distrabution controler by mickdassive.
The AP62150WU in open source designs
The gallery holds 11 open source boards using the AP62150WU from 5 GitHub repositories; a typical one measures about 54.8 × 59.5 mm and carries around 49 components.
100% use four copper layers or more, and 9% carry an open source license.
The most starred is LCSC TaishanPi RK3566 by theBrutzler.
Microcontrollers on boards using the AP62150WU
What boards using the AP62150WU are built for
AP62150WU: common questions
Where can I find a AP62150WU reference design?
Each of the 11 boards on this page is a real design using the AP62150WU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP62150WU SW pin connected?
The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 402 nF). Counted from the KiCad layouts of 5 open source designs using the AP62150WU.
What decoupling capacitors do designs use on the AP62150WU VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the AP62150WU.
What resistor goes on the AP62150WU FB pin?
The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 15 kΩ). Counted from the KiCad layouts of 5 open source designs using the AP62150WU.
Which microcontrollers do boards using the AP62150WU use?
Most are built on TI MSP430/CC (6), ESP32 (2) and RP2040/RP2350 (2).
How big is a typical board using the AP62150WU?
The median is 54.8 × 59.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP62150WU?
By GitHub stars, LCSC TaishanPi RK3566 by theBrutzler, with 1 stars.
Can I simulate one of these boards using the AP62150WU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.