Arachne

TheColonelYoung·Arachne·PCB/Arachne.kicad_pcb

Arachne PCB layout, top view — open source STM32 board by TheColonelYoung

About the Arachne PCB

Arachne is an open source STM32 PCB design by TheColonelYoung, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 70 mm, with 265 components from 57 distinct parts.

Its main chip is the STM32L452CEUx, from the STM32 family. Other key parts include the WS2818B, L6470_HTSSOP28, ACS712xLCTR-20A, NCP1117-5.0_SOT223 and L5973D. By type, the board carries 99 capacitors, 77 diodes, 50 resistors, 13 ICs, 12 connectors and 6 modules.

From the project

Mainly 3D printed manipulator with 6 axis of freedom based on design of steward platform

!!! Now the notes in this repository are rather assumptions that will need to be verified in practice !!!

Platform is based on two nearly triangular bases connected with 6 linear actuators. Control of these actuators is driven from motherboard. Lower base is stationary, upper base part is movable. Motherboard is positioned in lower triangle base. Motherboard communicates with controller (pc) via serial line with G-code. First version of platform is 3D printed. Next version are supposed to be from aluminium.

Arachne, from the project README
From the project README

Main components on the Arachne

Arachne bill of materials (BOM)

265 components, 57 distinct parts.

QtyPartRefs
1
STM32L452CEUx
U101
1
WS2818B
U102
6
L6470_HTSSOP28
U201, U301, U401, U501, U601, U701
1
ACS712xLCTR-20A
U801
1
NCP1117-5.0_SOT223
U802
1
L5973D
U803
1
NCP1117-3.3_SOT223
U804
1
USBLC6-2SC6
U901
6
Stepper_Motor_bipolar
M201, M301, M401, M501, M601, M701
1
AOD4189
Q801
1
Salae_logic
J101
1
Extension
J102
6
SW2
J201, J301, J401, J501, J601, J701
1
V_IN
J801
1
USB_B
J901
1
PROG_CONN_STM_6p
J902
1
DBG_UART
J903
1
2A
F801
1
20k
RV801
1
SW_Push
SW101
Show 37 more
QtyPartRefs
12
LED
D101, D102, D103, D104, D105, D106, D107, D108 +4
1
ASMB-MTB0-0A3A2
D109
2
ESDA6V1-5SC6
D114, D802
6
BAV99
D201, D301, D401, D501, D601, D701
49
SKL310
D202, D203, D204, D205, D206, D207, D208, D209 +41
1
1SMB5925
D801
1
7V
D804
1
STPS340U
D805
1
GREEN
D901
1
YELLOW
D902
2
BLUE
D903, D904
2
22R@100MHz
FB801, FB802
1
15uH
L801
1
50R@100MHz, 3A
L901
17
100nF
C101, C102, C103, C104, C105, C106, C107, C108 +9
6
220nF/16V
C201, C301, C401, C501, C601, C701
12
47uF/6,3V
C202, C203, C302, C303, C402, C403, C502, C503 +4
36
100nF/50V
C204, C205, C206, C207, C208, C209, C304, C305 +28
12
100uF/63V
C210, C211, C310, C311, C410, C411, C510, C511 +4
6
10nF/50V
C212, C312, C412, C512, C612, C712
2
1uF (X7R)
C801, C803
1
10uF 50V (ceramic)
C802
4
4.7uF (X7R)
C806, C807, C812, C813
1
300uF 16V
C809
1
220nF
C810
1
22nF
C811
4
22R
R101, R102, R901, R902
14
100k
R103, R201, R202, R301, R302, R401, R402, R501 +6
7
10k
R104, R802, R804, R805, R806, R807, R810
6
560k
R203, R303, R403, R503, R603, R703
6
2k7
R204, R304, R404, R504, R604, R704
6
1k
R205, R305, R405, R505, R605, R705
1
180k
R801
1
20k
R808
1
4.7k
R809
3
4x22R
RN101, RN102, RN103
1
R_Pack04
RN901

Arachne design files

The KiCad project lives in the TheColonelYoung/Arachne repository on GitHub; these links point at the commit this page was built from.

Arachne: common questions

What microcontroller does the Arachne use?

The Arachne is built around the STM32L452CEUx, from the STM32 family.

How big is the Arachne PCB?

The Arachne measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arachne?

265 components, from 57 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arachne design files?

From the TheColonelYoung/Arachne repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arachne design in my own project?

Yes, under the terms of its GPL-3.0 license, which TheColonelYoung chose for the repository.

Can I test firmware for the Arachne without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards