Console-Server

TheKingOfChaos·Console-Server

Console-Server PCB layout, top view — open source AVR/Arduino board by TheKingOfChaos

About the Console-Server PCB

Console-Server is an open source AVR/Arduino PCB design by TheKingOfChaos, published on GitHub. It is a 4-layer board measuring 138 × 141 mm, with 284 components from 71 distinct parts.

Its main chip is the ATTINY3216-SN, from the AVR/Arduino family. Other key parts include the FT4232HL, USB2514BI-AEZG, LM317, TPS54560BDDAR and TPS54360BDDAR. By type, the board carries 167 capacitors, 57 resistors, 26 ICs, 11 inductors, 9 connectors and 6 diodes.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

48 RS-232 console ports on one Raspberry Pi: three identical boards, 16 ports each. Built from the design record of 2026-10-10. KiCad 10.0.7.

48 RS-232 console ports on one Raspberry Pi: three identical boards, 16 ports each. Built from the design record of 2026-10-10. KiCad 10.0.7.

Reference designators the record names are kept: F2, Q1, Q2, R9, R28, R34, R43, D3, D4, C24, C46, C62, C63, C174, X1, JP2, U10–U17.

1. RJ45 quantity. LCSC C46261623 is a single 2×8 ganged block with all 16 jacks (~115 mm wide), not a 2-jack block. The BOM has 1 per board, not 8. 2. Buck converters (the record leaves them open). TPS54560B (+5V, 5 A) and TPS54360B (+3.3V, 3.5 A): both 60 V-rated (above the 42.1 V TVS clamp), with Eco-mode pulse…

Main components on the Console-Server

Console-Server bill of materials (BOM)

284 components, 71 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
FT4232HL
U1, U2, U3, U4
1
USB2514BI-AEZG
USB2514BI-AEZG-TR
U5
1
ATTINY3216-SN
ATtiny3216-SN
U6
1
LM317
U7
1
TPS54560BDDAR
U8
1
TPS54360BDDAR
U9
8
MAX3232EIDR
U10, U11, U12, U13, U14, U15, U16, U17
1
SP3232EEN-L
SP3232EEN-L/TR
U18
1
LM74700QDBVTQ1
U19
1
24LC02B-I/SN
U20
1
24LC32A-I/SN
U21
1
PRTR5V0U2F
U22
4
93LC46BT-I/SN
U31, U32, U33, U34
1
AON7524
Q1
1
IRFR5305TRPBF
Q2
1
24MHZ
24MHz
X1
4
12MHZ
12MHz
X2, X3, X4, X5
1
C165948
USB-C
J1
1
C2977589
RPi GPIO 2x20
J2
1
C492412
PWR_CHAIN
J3
Show 51 more
QtyPartRefs
1
C2897386
PWR_CHAIN
J4
1
HC-RJ45-059D-2X8-2-04
HC-RJ45-059D-2x8-2-04
J5
1
C49257
PI_CONSOLE
J6
1
C49257
UPDI
J7
1
C492417
LINK
J8
1
C2897391
LINK
J9
1
0468002.NRHF
F2
1
B560C
D1
1
B360A
D2
1
SMAJ26A
D3
1
BZT52C15
D4
1
SMAJ6.0A
D5
1
C12065
green
D6
9
BLM18KG601SN1D
FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8 +1
1
TMPC1265HP-100MG-D
10uH
L1
1
SRP7028A-100M
10uH
L2
111
100NF
100nF
C1, C4, C7, C13, C16, C22, C24, C28 +103
3
2.2UF
2.2uF
C2, C3, C12
3
4.7NF
4.7nF
C5, C14, C34
2
47PF
47pF
C6, C15
8
22UF
22uF
C8, C9, C10, C11, C17, C18, C19, C53
2
1UF
1uF
C20, C174
7
10UF
10uF
C21, C23, C27, C71, C98, C125, C152
1
470UF
470uF
C25
1
220UF
220uF
C26
11
1UF
1uF
C36, C38, C51, C73, C75, C100, C102, C127 +3
6
4.7UF
4.7uF
C40, C41, C61, C90, C117, C144
1
100UF
100uF
C46
1
4.7nF
C56
8
33PF
33pF
C57, C58, C86, C87, C113, C114, C140, C141
2
15PF
15pF
C62, C63
2
243K
243k
R1, R5
2
16.9K
16.9k
R2, R6
1
53.6K
53.6k
R3
19
10K
10k
R4, R8, R15, R21, R22, R23, R24, R25 +11
1
31.6K
31.6k
R7
1
240
R9
1
390
R10
2
4.7k
R11, R12
2
3.9K
3.9k
R13, R14
3
5.1K
5.1k
R16, R17, R31
2
47K
47k
R18, R27
2
100K
100k
R19, R40
3
1M
R20, R43, R45
5
12K
12k
R26, R46, R49, R52, R55
1
4.3K
4.3k
R29
1
7.5K
7.5k
R30
1
6.8K
6.8k
R32
3
0
R36, R38, R44
1
1k
R42
4
2.2K
2.2k
R47, R50, R53, R56

Console-Server design files

The KiCad project lives in the TheKingOfChaos/Console-Server repository on GitHub; these links point at the commit this page was built from.

Console-Server: common questions

What microcontroller does the Console-Server use?

The Console-Server is built around the ATTINY3216-SN, from the AVR/Arduino family.

How big is the Console-Server PCB?

The Console-Server measures 138 × 141 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Console-Server?

284 components, from 71 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Console-Server design files?

From the TheKingOfChaos/Console-Server repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Console-Server design in my own project?

The repository has no license, so all rights stay with TheKingOfChaos. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Console-Server without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards