9 open source boards using the TPS54360BDDAR
Real designs built with the TPS54360BDDAR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pi-In-The-Skyy
neatstranger
80.9 × 63 mm62 parts6LCustom license24APMHat-4-powered
stephendade
65 × 30.5 mm57 parts2LGPL-3.01STM32
Bornier
bornier-dev
150 × 107.5 mm506 parts4LNo license0AVR/Arduino
Console-Server
TheKingOfChaos
138 × 141 mm284 parts4LNo license0STM32
Fc h743
dvntekim
50 × 50 mm178 parts6LNo license0ESP32
Tiago robotiq adapter
hardware-designs-iai
62 × 60 mm56 parts4LNo license0Konnect evidence
Cirrus-Lab
40 × 30 mm7 parts2LAGPL-3.00KakuteHAT v2
stephendade
65 × 56 mm44 parts2LGPL-3.01Raspberry Pi
PiConnectLite
stephendade
65 × 30.5 mm42 parts2LGPL-3.01
How designs wire the TPS54360BDDAR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS54360BDDAR connects to, and the resistors, capacitors and other passives placed on it.
- The BOOT pin has a series capacitor on 6 of 6 designs, most often 100 nF.
- The COMP pin has a series resistor on 6 of 6 designs, most often 13 kΩ (then 30 kΩ).
- The SW pin has a series capacitor on 6 of 6 designs, most often 100 nF.
- The SW pin has a inductor on 6 of 6 designs, most often 10 µH (then 8.2 µH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BOOTpin 1 | Connected to: Signal 100% |
|
| VINpin 2 | Connected to: VIN_POST 83% · a signal 17% |
|
| ENpin 3 | Connected to: Not connected 50% · a signal 50% |
|
| RT/CLKpin 4 | Connected to: Signal 100% |
|
| FBpin 5 | Connected to: Signal 100% |
|
| COMPpin 6 | Connected to: Signal 100% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| SWpin 8 | Connected to: Signal 100% |
|
| PADpin 9 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pi-In-The-Skyy by neatstranger, APMHat-4-powered by stephendade, Bornier by bornier-dev and Fc h743 by dvntekim.
The TPS54360BDDAR in open source designs
The gallery holds 9 open source boards using the TPS54360BDDAR from 7 GitHub repositories; a typical one measures about 65 × 56 mm and carries around 57 components.
56% use four copper layers or more, and 44% carry an open source license.
The most starred is Pi-In-The-Skyy by neatstranger.
Parts used alongside the TPS54360BDDAR
Microcontrollers on boards using the TPS54360BDDAR
What boards using the TPS54360BDDAR are built for
TPS54360BDDAR: common questions
Where can I find a TPS54360BDDAR reference design?
Each of the 9 boards on this page is a real design using the TPS54360BDDAR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS54360BDDAR BOOT pin connected?
The BOOT pin has a series capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPS54360BDDAR.
What resistor goes on the TPS54360BDDAR COMP pin?
The COMP pin has a series resistor on 6 of 6 designs, most often 13 kΩ (then 30 kΩ). Counted from the KiCad layouts of 6 open source designs using the TPS54360BDDAR.
How is the TPS54360BDDAR SW pin connected?
The SW pin has a series capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TPS54360BDDAR.
Which microcontrollers do boards using the TPS54360BDDAR use?
Most are built on STM32 (2), AVR/Arduino (1), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the TPS54360BDDAR?
The median is 65 × 56 mm, and 44% are two-layer designs.
What is the most popular open source board using the TPS54360BDDAR?
By GitHub stars, Pi-In-The-Skyy by neatstranger, with 24 stars.
Can I simulate one of these boards using the TPS54360BDDAR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.