Keyey
Thenewtechgu·Keyey·Keyey/Keyey.kicad_pcb
About the Keyey PCB
Keyey is an open source RP2040/RP2350 PCB design by Thenewtechgu, published on GitHub. It is a 4-layer board measuring 304.8 × 125.5 mm, with 285 components from 18 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223 and W25Q128JVS. By type, the board carries 168 diodes, 102 capacitors, 7 resistors, 3 ICs, 3 switches and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
A custom made 75 percent keyboard powered by the Rp2350.
Main components on the Keyey
Keyey bill of materials (BOM)
285 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | ABM8-272-T3 | XTAL_ABM8-272-T3 | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Amphenol_12401948E412A | J1 |
| 2 | SW_Push | Panasonic_EVQPUJ_EVQPUA | SW3, SW7 |
| 1 | C361165 RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6 |
| 83 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +75 |
| 85 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D84, D85, D86, D87, D88, D93, D94, D95 +77 |
| 2 | 1u | C_0402_1005Metric | C1, C13 |
| 9 | 100N 100n | C_0402_1005Metric | C2, C3, C4, C7, C8, C9, C10, C11 +1 |
| 3 | 10U 10u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6, C22 |
| 1 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19 |
| 2 | 15P 15p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20, C21 |
| 85 | 0.1UF 0.1uf | C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C27, C28, C29, C32, C33, C34, C35, C36 +77 |
| 2 | 5.1K | R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R1, R2 |
| 2 | 27.4 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 3 | 1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12, R20 |
Keyey design files
The KiCad project lives in the Thenewtechgu/Keyey repository on GitHub; these links point at the commit this page was built from.
Keyey: common questions
What microcontroller does the Keyey use?
The Keyey is built around the RP2040, from the RP2040/RP2350 family.
How big is the Keyey PCB?
The Keyey measures 304.8 × 125.5 mm, has 4 copper layers and is 1.199896 mm thick.
How many components are on the Keyey?
285 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keyey design files?
From the Thenewtechgu/Keyey repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keyey design in my own project?
The repository has no license, so all rights stay with Thenewtechgu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Keyey without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k