Pikey
Thenewtechgu·Pikey·Pikey/Pikey.kicad_pcb
About the Pikey PCB
Pikey is an open source RP2040/RP2350 PCB design by Thenewtechgu, published on GitHub. It is a 4-layer board measuring 15.7 × 40.1 mm, with 46 components from 21 distinct parts.
Its main chip is the C42415655, from the RP2040/RP2350 family. Other key parts include the C26537 and C97521. By type, the board carries 21 capacitors, 14 resistors, 3 ICs, 3 diodes, 2 connectors and 1 crystal.
From the project
My verson of a usb rubber ducky that can also be used as a storage device
My verson of a usb rubber ducky that can also be used as a storage device ## The Schematic and board
Pikey uses - RP2350B as the controller and communicater between the chip and the computer - Flash memory (8mb) - Micro sd card ( can be used for storage of payload or to be used as a normal flash drive) - A user configurable Tactile Switch - A 3 color LED (Red, Blue, Green)
Main components on the Pikey
Pikey bill of materials (BOM)
46 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C42415655 RP2350B | QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | C26537 NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | C97521 W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | C20625731 ABM8-272-T3 | XTAL_ABM8-272-T3 | Y1 |
| 1 | C134112 DX07P024MJ1R1500 | JAE_DX07P024MJ1R1500 | J2 |
| 1 | C114218 Microsd card | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | C139797 SKRPACE010 | SW_SKRPACE010 | S1 |
| 1 | C2909770 SMLVN6RGB | LED_ROHM_SMLVN6 | D1 |
| 2 | C145179 5V | D_0402_1005Metric | D17, D18 |
| 1 | AOTA-B201610S3R3-101-T | AOTAB201610S3R3101T | L2 |
| 4 | C23733 4.7uF | C_0402_1005Metric | C1, C2, C3, C7 |
| 3 | C315248 10uF | C_0402_1005Metric | C4, C5, C29 |
| 12 | C26409 100uF | C_0402_1005Metric | C6, C8, C9, C10, C11, C12, C13, C14 +4 |
| 2 | C86285 15pF | C_0402_1005Metric | C19, C20 |
| 2 | C105872 5.1kΩ | R_0201_0603Metric | R1, R14 |
| 2 | C413051 27Ω | R_0201_0603Metric | R2, R3 |
| 1 | C2906868 33Ω | R_0402_1005Metric | R4 |
| 2 | C106235 1kΩ | R_0402_1005Metric | R5, R6 |
| 1 | C163450 9.1kΩ | R_0201_0603Metric | R7 |
| 1 | C137946 6.2kΩ | R_0201_0603Metric | R8 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | C60490 10kΩ | R_0201_0603Metric | R9, R10, R11, R12, R13 |
Pikey design files
The KiCad project lives in the Thenewtechgu/Pikey repository on GitHub; these links point at the commit this page was built from.
- LayoutPikey/Pikey.kicad_pcb
- SchematicPikey/Pikey.kicad_sch
- BOMproduction/BOM.csv
Pikey: common questions
What microcontroller does the Pikey use?
The Pikey is built around the C42415655, from the RP2040/RP2350 family.
How big is the Pikey PCB?
The Pikey measures 15.7 × 40.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pikey?
46 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pikey design files?
From the Thenewtechgu/Pikey repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pikey design in my own project?
The repository has no license, so all rights stay with Thenewtechgu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pikey without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k