ESP32 RGB LED CONTROLLER
theonlyakhil·ESP32_RGB_LED_CONTROLLER·hardware/esp32_rgb_controller.kicad_pcb
About the ESP32 RGB LED CONTROLLER PCB
ESP32 RGB LED CONTROLLER is an open source ESP32 PCB design by theonlyakhil, published on GitHub. It is a 2-layer board measuring 20 × 50 mm, with 43 components from 29 distinct parts.
Its main chip is the ESPRESSIF ESP32-C3FH4, from the ESP32 family. Other key parts include the DIODES AP7361C-33E-13, TI SN74AHCT1G125DBVR and ST USBLC6-2SC6. By type, the board carries 16 capacitors, 11 resistors, 4 ICs, 4 inductors, 2 connectors and 2 switches.
It belongs with the iot & wireless, power & battery and usb & debug tools designs in this gallery.
From the project
Open esp32rgbcontroller.kicadpro` in KiCad 7 or later. The symbol library, footprint library and library tables are bundled. The schematic and PCB are editable native KiCad files.
Open esp32rgbcontroller.kicadpro` in KiCad 7 or later. The symbol library, footprint library and library tables are bundled. The schematic and PCB are editable native KiCad files.
J2 pin numbering is given in the schematic, footprint and assembly placement file. The top silk reads 5V D G:
The connector is not keyed. Check the mating cable's pin order before plugging it in. This board drives 5 V WS2812-compatible strips, not analog RGB, 12 V or 24 V strips.
Main components on the ESP32 RGB LED CONTROLLER
ESP32 RGB LED CONTROLLER bill of materials (BOM)
43 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESPRESSIF ESP32-C3FH4 ESP32-C3FH4 / 4MB ESPRESSIF | QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | DIODES AP7361C-33E-13 AP7361C-33E-13 / 1A DIODES | SOT-223-3_TabPin2 | U2 |
| 1 | TI SN74AHCT1G125DBVR SN74AHCT1G125DBVR TI | SOT-23-5 | U3 |
| 1 | ST USBLC6-2SC6 USBLC6-2SC6 ST | SOT-23-6 | U4 |
| 1 | EPSON TSX-3225 40.0000MF10Y-K0 40MHz / CL10p / 10ppm EPSON | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Korean Hroparts Elec TYPE-C-31-M-12 USB-C / power + programming Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | CJT(Changjiang Connectors) A2541HWR-3P WS2812 / 5V-DATA-GND CJT(Changjiang Connectors) | A2541HWR_3P | J2 |
| 1 | Walsin RFANT3216120A1T RFANT3216120A1T Walsin | RFANT3216120A1T | AE1 |
| 1 | TECHFUSE mSMD150-16V 1.5A hold / 16V TECHFUSE | Fuse_1812_4532Metric | F1 |
| 1 | XKB Connection TS-1187A-B-A-B RESET XKB Connection | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | XKB Connection TS-1187A-B-A-B BOOT / GPIO9 XKB Connection | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | Hubei KENTO Elec KT-0603R RED test / GPIO3 Hubei KENTO Elec | LED_0603_1608Metric | D1 |
| 1 | TDK MLG1005S2N7BT000 2.7nH / 800mA TDK | L_0402_1005Metric | L1 |
| 1 | TDK MLG1005S2N7BT000 2.7nH RF initial TDK | L_0402_1005Metric | L2 |
| 1 | TDK MLG1005S2N7BT000 2.7nH ANT initial TDK | L_0402_1005Metric | L3 |
| 1 | muRata LQW15AN24NJ00D 24nH XTAL muRata | L_0402_1005Metric | L4 |
| 3 | Samsung Electro-Mechanics CL10A106MA8NRNC 10u / 25V Samsung Electro-Mechanics | C_0603_1608Metric | C1, C2, C8 |
| 5 | Samsung Electro-Mechanics CL05B104KO5NNNC 100n Samsung Electro-Mechanics | C_0402_1005Metric | C3, C4, C5, C7, C10 |
| 2 | Samsung Electro-Mechanics CL05A105KA5NQNC 1u / 25V Samsung Electro-Mechanics | C_0402_1005Metric | C6, C9 |
| 1 | Samsung Electro-Mechanics CL21A226MAQNNNE 22u / 25V Samsung Electro-Mechanics | C_0805_2012Metric | C11 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | muRata GRM1555C1H1R5BA01D 1.5p RF initial muRata | C_0402_1005Metric | C12, C13 |
| 1 | muRata GRM1555C1H1R5BA01D 1.5p / DNP tune muRata | C_0402_1005Metric | C14 |
| 2 | FH 0402CG150J500NT 15p / tune FH | C_0402_1005Metric | C15, C16 |
| 2 | UNI-ROYAL 0402WGF5101TCE 5.1k UNI-ROYAL | R_0402_1005Metric | R1, R2 |
| 2 | UNI-ROYAL 0402WGF220JTCE 22R UNI-ROYAL | R_0402_1005Metric | R3, R4 |
| 4 | UNI-ROYAL 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R5, R6, R7, R8 |
| 1 | UNI-ROYAL 0402WGF1003TCE 100k UNI-ROYAL | R_0402_1005Metric | R9 |
| 1 | UNI-ROYAL 0402WGF3300TCE 330R UNI-ROYAL | R_0402_1005Metric | R10 |
| 1 | UNI-ROYAL 0402WGF1001TCE 1k UNI-ROYAL | R_0402_1005Metric | R11 |
ESP32 RGB LED CONTROLLER design files
The KiCad project lives in the theonlyakhil/ESP32_RGB_LED_CONTROLLER repository on GitHub; these links point at the commit this page was built from.
ESP32 RGB LED CONTROLLER: common questions
What microcontroller does the ESP32 RGB LED CONTROLLER use?
The ESP32 RGB LED CONTROLLER is built around the ESPRESSIF ESP32-C3FH4, from the ESP32 family.
How big is the ESP32 RGB LED CONTROLLER PCB?
The ESP32 RGB LED CONTROLLER measures 20 × 50 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the ESP32 RGB LED CONTROLLER?
43 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32 RGB LED CONTROLLER design files?
From the theonlyakhil/ESP32_RGB_LED_CONTROLLER repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32 RGB LED CONTROLLER design in my own project?
The repository has no license, so all rights stay with theonlyakhil. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 RGB LED CONTROLLER without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k