Main board independent pumps

theotufford·Wasabi·electronics/mainBoard_kicad_independent_pumps/main_board_independent_pumps.kicad_pcb

Main board independent pumps layout, top view — open source RP2040/RP2350 board by theotufford

About the Main board independent pumps

Main board independent pumps is an open source RP2040/RP2350 PCB design by theotufford, published on GitHub. It is a 2-layer board measuring 127 × 93 mm, with 32 components from 11 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 13 connectors, 8 capacitors, 1 module and 1 switch.

It belongs with the robotics & motion designs in this gallery.

From the project

(currently working actively with this BOM but if you decide to build this project you should make your own copy and make sure to clear all of the material statuses and reset them to red so you can track)

Main components on the Main board independent pumps

Main board independent pumps bill of materials (BOM)

32 components, 11 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
A_lim
J1
1
B_lim
J2
1
Z_lim
J3
8
Conn_01x04_Socket
J4, J5, J6, J7, J8, J9, J12, J13
1
5v
J10
1
24v
J11
1
~
3b+header1
8
~
A_mot1, B_mot1, pump1, pump2, pump3, pump4, pump5, z_mot1
1
SW_DPDT_x2
SW1
8
C_Small_US
C1, C2, C3, C4, C5, C6, C7, C8

Main board independent pumps design files

The KiCad project lives in the theotufford/Wasabi repository on GitHub; these links point at the commit this page was built from.

Main board independent pumps: common questions

What microcontroller does the Main board independent pumps use?

The Main board independent pumps is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Main board independent pumps?

The Main board independent pumps measures 127 × 93 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main board independent pumps?

32 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main board independent pumps design files?

From the theotufford/Wasabi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Main board independent pumps design in my own project?

The repository has no license, so all rights stay with theotufford. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main board independent pumps without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Wasabi

Similar boards