MainBoard

theotufford·Wasabi·electronics/mainBoard_kicad/mainBoard_kicad.kicad_pcb

MainBoard PCB layout, top view — open source RP2040/RP2350 board by theotufford

About the MainBoard PCB

MainBoard is an open source RP2040/RP2350 PCB design by theotufford, published on GitHub. It is a 2-layer board measuring 215 × 79.4 mm, with 47 components from 11 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 18 connectors, 13 capacitors, 1 module and 1 switch.

It belongs with the robotics & motion designs in this gallery.

From the project

(currently working actively with this BOM but if you decide to build this project you should make your own copy and make sure to clear all of the material statuses and reset them to red so you can track)

Main components on the MainBoard

MainBoard bill of materials (BOM)

47 components, 11 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
A_lim
J1
1
B_lim
J2
1
Z_lim
J3
13
Conn_01x04_Socket
J4, J5, J6, J7, J8, J9, J12, J13 +5
1
5v
J10
1
24v
J11
1
~
3b+header1
13
~
A_mot1, B_mot1, pump1, pump2, pump3, pump4, pump5, pump6 +5
1
SW_DPDT_x2
SW1
13
C_Small_US
C1, C2, C3, C4, C5, C6, C7, C8 +5

MainBoard design files

The KiCad project lives in the theotufford/Wasabi repository on GitHub; these links point at the commit this page was built from.

MainBoard: common questions

What microcontroller does the MainBoard use?

The MainBoard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the MainBoard PCB?

The MainBoard measures 215 × 79.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MainBoard?

47 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the MainBoard design files?

From the theotufford/Wasabi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MainBoard design in my own project?

The repository has no license, so all rights stay with theotufford. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MainBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Wasabi

Similar boards