HardLabs

RP2350 60QFN minimal

TheronRogers·bee-whoop-tailsitter·electronics/bee-core-bringup/vendor/RP2350A_Minimal_USBC/RP-006440-DD-2-RP2350A Minimal Board Kicad/RP2350_60QFN_minimal.kicad_pcb

RP2350 60QFN minimal PCB layout, top view — open source RP2040/RP2350 board by TheronRogers

About the RP2350 60QFN minimal PCB

RP2350 60QFN minimal is an open source RP2040/RP2350 PCB design by TheronRogers, published on GitHub. It is a 2-layer board measuring 52 × 51 mm, with 39 components from 19 distinct parts.

Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223 and W25Q128JVS. By type, the board carries 19 capacitors, 9 resistors, 4 connectors, 3 ICs, 2 switches and 1 crystal.

From the project

Bee whoop-scale dual-motor dual-elevon tailsitter — VibeCAD airframe + Bee Core RP2350 bring-up electronics

The primary goal of this project is to have a reference design for RP2350A, that uses USBC and has the LCSC/JLCPCB parts defined.

A secondary goal is to make the design physically small as possiable with one side SMD assembly.

DO NOT USE - This design has not been tested yet.

- Microcontroller - RP2350A (C42411118) - Polarised inductor Abracon AOTA-B201610S3R3-101-T (C42411119) - Crystal oscillator 12 MHz Abracon ABM8-272-T3 (C20625731) - 4Mb Flash - Winbond Elec W25Q32JVUUIQ (C2999380) - USB TYPE-C - SHOU HAN USB TYPE-C 16PIN 2MD (C2765186) * Extended - 3.3v Voltage Regulators -…

Main components on the RP2350 60QFN minimal

RP2350_60QFNNCP1117-3.3_SOT223W25Q128JVS

RP2350 60QFN minimal bill of materials (BOM)

39 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2350_60QFN
U1
1
NCP1117-3.3_SOT223
U2
1
W25Q128JVS
U3
1
ABM8-272-T3
Y1
1
USB_B_Micro
J1
2
Conn_02x18_Odd_Even
J2, J3
1
SM03B-SRSS-TB
J4
2
SW_Push
SW1, SW2
1
3.3u
L1
3
10u
C1, C5, C19
10
100n
C2, C8, C11, C12, C13, C14, C15, C16 +2
2
15p
C3, C4
2
4.7u
C6, C7
2
4.7u
C9, C10
2
DNF
R1, R9
3
1k
R2, R4, R6
1
33
R5
2
27
R7, R8
1
0
R10

RP2350 60QFN minimal design files

The KiCad project lives in the TheronRogers/bee-whoop-tailsitter repository on GitHub; these links point at the commit this page was built from.

RP2350 60QFN minimal: common questions

What microcontroller does the RP2350 60QFN minimal use?

The RP2350 60QFN minimal is built around the RP2350_60QFN, from the RP2040/RP2350 family.

How big is the RP2350 60QFN minimal PCB?

The RP2350 60QFN minimal measures 52 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RP2350 60QFN minimal?

39 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RP2350 60QFN minimal design files?

From the TheronRogers/bee-whoop-tailsitter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RP2350 60QFN minimal design in my own project?

The repository has no license, so all rights stay with TheronRogers. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RP2350 60QFN minimal without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in bee-whoop-tailsitter

Similar boards