72 open source boards using the RP2350_60QFN

Real designs built with the RP2350_60QFN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

72 boardsClear filters|Most starred

How designs wire the RP2350_60QFN

Read from the KiCad layouts of 51 open source designs, one per repository: what each pin of the RP2350_60QFN connects to, and the resistors, capacitors and other passives placed on it.

  • The IOVDD pins have a decoupling capacitor on 50 of 51 designs, most often 100 nF (then 4.7 µF).
  • The XIN pin has a capacitor to GND on 50 of 51 designs, most often 15 pF (then 22 pF).
  • The VREG_VIN pin has a decoupling capacitor on 50 of 51 designs, most often 100 nF (then 4.7 µF).
  • The USB_OTP_VDD pin has a decoupling capacitor on 50 of 51 designs, most often 100 nF (then 4.7 µF).
IOVDDpin 1, 11, 20, 30, 38, 45Connected to: 3.3V 96%
  • Decoupling capacitor on 98% · 100 nF (801), 4.7 µF (142), 10 µF (20)
DVDDpin 6, 23, 39Connected to: 1.1V 96%
  • Decoupling capacitor on 96% · 100 nF (112), 4.7 µF (81), 10 µF (2)
XINpin 21Connected to: Signal 98%
  • Capacitor to GND on 98% · 15 pF (43), 22 pF (2), 12 pF (1)
  • Crystal on 94% · 12 MHz (8)
XOUTpin 22Connected to: Signal 98%
  • Series resistor on 94% · 1 kΩ (47), 30 Ω (1)
ADC_AVDDpin 44Connected to: 3.3V 90%
  • Decoupling capacitor on 96% · 100 nF (113), 4.7 µF (43), 10 µF (6)
VREG_AVDDpin 46Connected to: VREG_AVDD 76% · a signal 22%
  • Decoupling capacitor on 92% · 4.7 µF (43), 10 µF (2)
VREG_PGNDpin 47Connected to: GND 98%
VREG_LXpin 48Connected to: VREG_LX 76% · a signal 22%
  • Inductor on 82% · 3.3 µH (37), 3.3 H (2)
VREG_VINpin 49Connected to: 3.3V 96%
  • Decoupling capacitor on 98% · 100 nF (129), 4.7 µF (48), 10 µF (7)
VREG_FBpin 50Connected to: 1.1V 96%
  • Decoupling capacitor on 96% · 4.7 µF (54), 100 nF (27), 1 µF (1)
  • Inductor on 84% · 3.3 µH (36), 3.3 H (2)
USB_DMpin 51Connected to: Signal 96%
  • Series resistor on 90% · 27 Ω (36), 22 Ω (5), 30 Ω (2)
USB_DPpin 52Connected to: Signal 96%
  • Series resistor on 90% · 27 Ω (36), 22 Ω (5), 30 Ω (2)
USB_OTP_VDDpin 53Connected to: 3.3V 96%
  • Decoupling capacitor on 98% · 100 nF (125), 4.7 µF (48), 10 µF (3)
QSPI_IOVDDpin 54Connected to: 3.3V 96%
  • Decoupling capacitor on 98% · 100 nF (128), 4.7 µF (48), 10 µF (3)
QSPI_SSpin 60Connected to: Signal 100%
  • Series resistor on 90% · 1 kΩ (44), 0 Ω (16), 2.2 kΩ (1)
GNDpin 61Connected to: GND 98%

38 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fire-24-f by piersfinlayson, Rp2350-gpio card by semitov, 16bit by bread-modular and MiSTle - Icepi-Zero Carrier by MiSTle-Dev.

The RP2350_60QFN in open source designs

The gallery holds 72 open source boards using the RP2350_60QFN from 51 GitHub repositories; a typical one measures about 55.8 × 67 mm and carries around 70 components.

72% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Fire-40-a by piersfinlayson.

Microcontrollers on boards using the RP2350_60QFN

RP2350_60QFN: common questions

Where can I find a RP2350_60QFN reference design?

Each of the 72 boards on this page is a real design using the RP2350_60QFN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the RP2350_60QFN IOVDD pin?

The IOVDD pins have a decoupling capacitor on 50 of 51 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 51 open source designs using the RP2350_60QFN.

How is the RP2350_60QFN XIN pin connected?

The XIN pin has a capacitor to GND on 50 of 51 designs, most often 15 pF (then 22 pF). Counted from the KiCad layouts of 51 open source designs using the RP2350_60QFN.

What decoupling capacitors do designs use on the RP2350_60QFN VREG_VIN pin?

The VREG_VIN pin has a decoupling capacitor on 50 of 51 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 51 open source designs using the RP2350_60QFN.

What parts are used alongside the RP2350_60QFN?

The W25Q128JVS, NCP1117-3.3_SOT223, USBLC6-2SC6, AP2112K-3.3 and W25Q16JVSS appear in the most repositories here.

Which microcontrollers do boards using the RP2350_60QFN use?

Most are built on RP2040/RP2350 (72).

How big is a typical board using the RP2350_60QFN?

The median is 55.8 × 67 mm, and 72% are two-layer designs.

What is the most popular open source board using the RP2350_60QFN?

By GitHub stars, Fire-40-a by piersfinlayson, with 380 stars.

Can I simulate one of these boards using the RP2350_60QFN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part