Remigochi
thetaspirit·remigochi-pcb
About the Remigochi PCB
Remigochi is an open source ESP32 PCB design by thetaspirit, published on GitHub. It is a 2-layer board measuring 63.5 × 76.2 mm, with 52 components from 29 distinct parts.
Its main chip is the C2913197, from the ESP32 family. Other key parts include the C627668, C544474, C4153167 and C23380830. By type, the board carries 19 resistors, 9 diodes, 6 switches, 5 ICs, 5 capacitors and 4 connectors.
From the project
For 18-500 capstone
Main components on the Remigochi
Remigochi bill of materials (BOM)
52 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C627668 MCP73833-xxx-UN | MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | C544474 ESD122DMXR | IC_ESD122DMXR | U2 |
| 1 | C2913197 ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 1 | C4153167 MAX-M10S | ublox_MAX | U4 |
| 1 | C23380830 AP2112K-3.3 | SOT-23-5 | U5 |
| 3 | C10487 PMOS | SOT-23 | Q1, Q2, Q3 |
| 1 | C2988369 USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | C20613191 Micro_SD_Card | TF-01A | J4 |
| 1 | C88374 Conn_Coaxial_Small | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J5 |
| 1 | C95299 Buzzer | Huaneng MLT-7525 | BZ1 |
| 6 | C2909692 SW_Push | Korean Hroparts Elec K2-1157SP-I4SW-01 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | C2984265 RED | D_1206_3216Metric | D1, D8 |
| 3 | C965825 GREEN | D_1206_3216Metric | D2, D7, D9 |
| 2 | C1322289 YELLOW | D_1206_3216Metric | D3, D6 |
| 1 | C10662 40V_TVS | D_0402_1005Metric | D4 |
| 1 | C241939 1N4148W | D_SOD-123 | D5 |
| 3 | C19702 10uF | C_0603_1608Metric | C1, C2, C8 |
| 1 | C19666 4.7uF | C_0603_1608Metric | C6 |
| 1 | C14663 100nF | C_0603_1608Metric | C7 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | C105872 5.1k | R_0402_1005Metric | R1, R2, R10 |
| 2 | C60490 10k | R_0402_1005Metric | R3, R14 |
| 1 | C60488 2k | R_0402_1005Metric | R4 |
| 3 | C106235 1k | R_0402_1005Metric | R5, R6, R7 |
| 1 | C60491 100k | R_0402_1005Metric | R8 |
| 1 | C163475 270k | R_0402_1005Metric | R9 |
| 4 | C138002 33 | R_0402_1005Metric | R11, R12, R13, R15 |
| 2 | C2909380 68 | R_0402_1005Metric | R16, R17 |
| 2 | C138052 15 | R_0402_1005Metric | R18, R19 |
Remigochi design files
The KiCad project lives in the thetaspirit/remigochi-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutremigochi-pcb.kicad_pcb
- Schematicremigochi-pcb.kicad_sch
- BOMjlc-bom.csv
Remigochi: common questions
What microcontroller does the Remigochi use?
The Remigochi is built around the C2913197, from the ESP32 family.
How big is the Remigochi PCB?
The Remigochi measures 63.5 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Remigochi?
52 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Remigochi design files?
From the thetaspirit/remigochi-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Remigochi design in my own project?
The repository has no license, so all rights stay with thetaspirit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Remigochi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k