5 open source boards using the C2913197
Real designs built with the C2913197, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Oomwoo esp32s3-cm
makerspet
110.2 × 110.5 mm86 parts2LApache-2.01ESP32
Hub
cUDGk
60 × 48 mm55 parts2LCustom license0ESP32
Remigochi
thetaspirit
63.5 × 76.2 mm52 parts2LNo license0RISC-V
Node
cUDGk
32 × 29 mm20 parts2LCustom license0ESP32
Dongle
cUDGk
48 × 30 mm16 parts2LCustom license0
The C2913197 in open source designs
The gallery holds 5 open source boards using the C2913197 from 3 GitHub repositories; a typical one measures about 60 × 48 mm and carries around 52 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Oomwoo esp32s3-cm by makerspet.
Parts used alongside the C2913197
What boards using the C2913197 are built for
C2913197: common questions
Where can I find a C2913197 reference design?
Each of the 5 boards on this page is a real design using the C2913197. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C2913197 use?
Most are built on ESP32 (4) and RISC-V (1).
How big is a typical board using the C2913197?
The median is 60 × 48 mm, and 100% are two-layer designs.
What is the most popular open source board using the C2913197?
By GitHub stars, Oomwoo esp32s3-cm by makerspet, with 1 stars.
Can I simulate one of these boards using the C2913197 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.