Stm32F0 devboard
Thiird·stm32F0_devboard
About the Stm32F0 devboard PCB
Stm32F0 devboard is an open source STM32 PCB design by Thiird, published on GitHub. It is a 2-layer board measuring 20.4 × 40.6 mm, with 34 components from 23 distinct parts.
Its main chip is the STM32F030K6T6, from the STM32 family. Other key parts include the AP2112K-3.3, SN74LVC2G04DCKR, CH340C and MT29F2G01ABAGDWB. By type, the board carries 11 capacitors, 7 resistors, 5 ICs, 4 connectors, 4 diodes and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Simple STM32F0 development board
stm32flash -b 115200 -i -rts,dtr:-dtr,rts -w ./program.bin /dev/ttyUSB0
Make sure to use the appropriate path to the .bin you want to flash and change ttyUSBO to whatever your system assigned to the dev board.
Main components on the Stm32F0 devboard
Stm32F0 devboard bill of materials (BOM)
34 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030K6T6 | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | SN74LVC2G04DCKR | SOT65P210X110-6N | U3 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | MT29F2G01ABAGDWB | SON127P600X800X65-8N | U5 |
| 1 | 16MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | left_bank | PinHeader_1x11_P2.54mm_Vertical | J2 |
| 1 | SWD_header | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | right_bank | PinHeader_1x11_P2.54mm_Vertical | J4 |
| 1 | 500mA | Fuse_0603_1608Metric | F1 |
| 1 | SW_Push_Open_Dual | SW_SKRPACE010 | SW1 |
| 1 | GREEN | LED_0603_1608Metric | D1 |
| 1 | PRTR5V0U2X | SOT-143 | D2 |
| 2 | RED | LED_0603_1608Metric | D3, D4 |
| 5 | 100n | C_0603_1608Metric | C1, C6, C8, C9, C10 |
| 2 | 22p | C_0603_1608Metric | C2, C3 |
| 3 | 1u | C_0603_1608Metric | C4, C5, C11 |
| 1 | 10u | C_0603_1608Metric | C7 |
| 3 | 3k3 | R_0603_1608Metric | R1, R7, R8 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5k1 | R_0603_1608Metric | R2, R3 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 1 | 22k | R_0603_1608Metric | R6 |
Stm32F0 devboard design files
The KiCad project lives in the Thiird/stm32F0_devboard repository on GitHub; these links point at the commit this page was built from.
- Layoutstm32f0_dev.kicad_pcb
- Schematicstm32f0_dev.kicad_sch
Stm32F0 devboard: common questions
What microcontroller does the Stm32F0 devboard use?
The Stm32F0 devboard is built around the STM32F030K6T6, from the STM32 family.
How big is the Stm32F0 devboard PCB?
The Stm32F0 devboard measures 20.4 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32F0 devboard?
34 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32F0 devboard design files?
From the Thiird/stm32F0_devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32F0 devboard design in my own project?
The repository has no license, so all rights stay with Thiird. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32F0 devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k