7 open source boards using the SN74LVC2G04DCKR
Real designs built with the SN74LVC2G04DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Qsbc
qfreiman
80 × 80 mm409 parts8LGPL-3.03STM32
Stm32F0 devboard
Thiird
20.4 × 40.6 mm34 parts2LNo license0STM32
FlightComputer
jbrown3859
90 × 90 mm78 parts4LNo license3ESP32
MagMouse
sbarisic
60 × 95 mm273 parts4LCustom license2ESP32
Main
sbarisic
80 × 125 mm207 parts4LCustom license2Upper
sbarisic
70 × 100 mm81 parts2LCustom license2ESP32
ARDF-TX UNIVERSAL CONTROLLER
DD1SB
100 × 100 mm197 parts2LMIT0
How designs wire the SN74LVC2G04DCKR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC2G04DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a capacitor to GND on 3 of 5 designs, most often 100 nF.
- The 1A pin has a series resistor on 2 of 5 designs, most often 0 Ω (then 100 kΩ).
- The 1Y pin has a series resistor on 2 of 5 designs, most often 0 Ω (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 1 | Connected to: The microcontroller 40% |
|
| GNDpin 2 | Connected to: GND 80% · a signal 20% | — |
| VCCpin 5 | Connected to: Signal 60% · 3.3V 40% |
|
| 1Ypin 6 | Connected to: The microcontroller 40% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FlightComputer by jbrown3859, Qsbc by qfreiman, MagMouse by sbarisic and ARDF-TX UNIVERSAL CONTROLLER by DD1SB.
The SN74LVC2G04DCKR in open source designs
The gallery holds 7 open source boards using the SN74LVC2G04DCKR from 5 GitHub repositories; a typical one measures about 80 × 95 mm and carries around 197 components.
57% use four copper layers or more, and 29% carry an open source license.
The most starred is Qsbc by qfreiman.
Parts used alongside the SN74LVC2G04DCKR
What boards using the SN74LVC2G04DCKR are built for
SN74LVC2G04DCKR: common questions
Where can I find a SN74LVC2G04DCKR reference design?
Each of the 7 boards on this page is a real design using the SN74LVC2G04DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74LVC2G04DCKR VCC pin connected?
The VCC pin has a capacitor to GND on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SN74LVC2G04DCKR.
What resistor goes on the SN74LVC2G04DCKR 1A pin?
The 1A pin has a series resistor on 2 of 5 designs, most often 0 Ω (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74LVC2G04DCKR.
What resistor goes on the SN74LVC2G04DCKR 1Y pin?
The 1Y pin has a series resistor on 2 of 5 designs, most often 0 Ω (then 2.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74LVC2G04DCKR.
What parts are used alongside the SN74LVC2G04DCKR?
The SN74LVC08APWR, SN74LVC125APWR, TPS22918DBVR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC2G04DCKR use?
Most are built on ESP32 (3) and STM32 (2).
How big is a typical board using the SN74LVC2G04DCKR?
The median is 80 × 95 mm, and 43% are two-layer designs.
What is the most popular open source board using the SN74LVC2G04DCKR?
By GitHub stars, Qsbc by qfreiman, with 3 stars.
Can I simulate one of these boards using the SN74LVC2G04DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.