ROSE-PILK v1
Thornbots·Electrical·2023-24/noname-board/ROSE-PILK_v1.5/ROSE-PILK_v1.kicad_pcb
About the ROSE-PILK v1 PCB
ROSE-PILK v1 is an open source RP2040/RP2350 PCB design by Thornbots, published on GitHub. It is a 4-layer board measuring 65 × 90 mm, with 50 components from 26 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the TXS0108EPW, XT30UPB-M and SN65HVD230DR. By type, the board carries 12 connectors, 11 resistors, 6 ICs, 2 transistors, 2 switches and 2 diodes.
From the project
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
Main components on the ROSE-PILK v1
ROSE-PILK v1 bill of materials (BOM)
50 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Pico | Updated_Pico | U1, U6 |
| 1 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | XT30UPB-M | XT30UPB-M | U4 |
| 2 | SN65HVD230DR | SOIC127P599X175-8N | U5, U7 |
| 1 | LM2940CT-5.0/NOPB LM2940CT-5.0_NOPB | TO254P1054X470X1955-3 | Q1 |
| 1 | PN2222A | TO-92_Inline | Q3 |
| 1 | Conn_01x04 | PinSocket_1x04_P2.00mm_Vertical | J1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.00mm_Vertical | J2 |
| 2 | Conn_01x02 | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J3, J5 |
| 2 | Conn_01x04 | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J4, J6 |
| 2 | Conn_01x04 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J7, J11 |
| 1 | Conn_02x06_Counter_Clockwise | PinSocket_2x06_P2.00mm_Vertical | J8 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.00mm_Vertical | J9 |
| 2 | Conn_02x02_Counter_Clockwise | PinSocket_2x02_P2.00mm_Vertical | J12, J13 |
| 13 | .1uF | C_Disc_D7.0mm_W2.5mm_P5.00mm | 5VCAP1, CAN1, CAN2, DR16, IMUC13, JETSON1V8, JETSON3V3, JETSONGND1 +5 |
| 2 | SW_Push | SW_PS1024ALRED | SW1, SW2 |
| 1 | WP154A4SUREQBFZGC | LED_WP154A4SUREQBFZGC | D16 |
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D17 |
| 1 | .47uF | C_Disc_D7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 22uF | C_Disc_D7.0mm_W2.5mm_P5.00mm | C3 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 250 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 333 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 4 | 0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R10, R20 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30, R31 |
| 2 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R32, R33 |
ROSE-PILK v1 design files
The KiCad project lives in the Thornbots/Electrical repository on GitHub; these links point at the commit this page was built from.
ROSE-PILK v1: common questions
What microcontroller does the ROSE-PILK v1 use?
The ROSE-PILK v1 is built around the Pico, from the RP2040/RP2350 family.
How big is the ROSE-PILK v1 PCB?
The ROSE-PILK v1 measures 65 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ROSE-PILK v1?
50 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the ROSE-PILK v1 design files?
From the Thornbots/Electrical repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ROSE-PILK v1 design in my own project?
The repository has no license, so all rights stay with Thornbots. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ROSE-PILK v1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in Electrical
RP2040/RP2350
Control Board V3
Thornbots
75 × 100 mm72 parts4LNo license0RP2040/RP2350
Measurement Testing
Thornbots
52.5 × 45 mm30 parts2LNo license0Cap Bank V3
Thornbots
45 × 55 mm18 parts2LNo license0Prj1 9 10 23
Thornbots
58.4 × 45.7 mm13 parts2LNo license0Slipring Board
Thornbots
75 × 50 mm12 parts2LNo license0ArmorPanel
Thornbots
101.6 × 76.2 mm9 parts2LNo license0Project 1
Thornbots
45.7 × 30.5 mm9 parts2LNo license0First project
Thornbots
11.1 × 30.5 mm7 parts2LNo license0Encoder board
Thornbots
29.6 × 22.5 mm3 parts2LNo license0
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k