Measurement Testing

Thornbots·Electrical·2025-26/Measurement Testing/Measurement Testing/Measurement Testing.kicad_pcb

Measurement Testing PCB layout, top view — open source RP2040/RP2350 board by Thornbots

About the Measurement Testing PCB

Measurement Testing is an open source RP2040/RP2350 PCB design by Thornbots, published on GitHub. It is a 2-layer board measuring 52.5 × 45 mm, with 30 components from 19 distinct parts.

Its main chip is the RASPBERRY_PI_PICO, from the RP2040/RP2350 family. Other key parts include the ADS8684IDBTR, INA240A2PWR and TPS54308DDCR. By type, the board carries 12 capacitors, 5 ICs, 2 connectors, 2 resistors and 1 inductor.

It belongs with the test & measurement designs in this gallery.

From the project

Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.

Main components on the Measurement Testing

Measurement Testing bill of materials (BOM)

30 components, 19 distinct parts.

QtyPartRefs
1
RASPBERRY_PI_PICO
U1
2
ADS8684IDBTR
U2, U3
1
INA240A2PWR
U4
1
TPS54308DDCR
U5
1
Power Supply
J1
1
XT30PW-F
J2
2
100n
Cbst1, Cbypass1
1
10u
Cin1
1
47u
Cout1
1
R_Potentiometer
RV1
1
13.7k
Rfbb1
1
100k
Rfbt1
1
5m
Rshunt1
1
13u
L1
4
10 uF
C1, C4, C8, C12
2
22 uF
C2, C9
6
1 uF
C3, C5, C6, C7, C10, C11
1
8.2k
R1
1
1k
R2

Measurement Testing design files

The KiCad project lives in the Thornbots/Electrical repository on GitHub; these links point at the commit this page was built from.

Measurement Testing: common questions

What microcontroller does the Measurement Testing use?

The Measurement Testing is built around the RASPBERRY_PI_PICO, from the RP2040/RP2350 family.

How big is the Measurement Testing PCB?

The Measurement Testing measures 52.5 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Measurement Testing?

30 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Measurement Testing design files?

From the Thornbots/Electrical repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Measurement Testing design in my own project?

The repository has no license, so all rights stay with Thornbots. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Measurement Testing without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Electrical

Similar boards