Hacky hackpad

Thunder-god-adi·Hacky-hackpad·PCB FILES/Macropad.kicad_pcb

Hacky hackpad PCB layout, top view — open source RP2040/RP2350 board by Thunder-god-adi

About the Hacky hackpad PCB

Hacky hackpad is an open source RP2040/RP2350 PCB design by Thunder-god-adi, published on GitHub. It is a 2-layer board measuring 65 × 70 mm, with 9 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 7 switches, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

3->> Fully Customizable { Modify The Code For Ur Own Functioning }

3->> Fully Customizable { Modify The Code For Ur Own Functioning }

IDK WHY EVERYTHING IS SO EXPENSIVE IN INDIA

Total Estimated Cost: $5 WITH SHIPPING CHARGES INCLUDED I'm only asking for pcb cost as you guys said.

Hacky hackpad, from the project README
From the project README

Main components on the Hacky hackpad

Hacky hackpad bill of materials (BOM)

9 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
CONN_01X04_PIN
Conn_01x04_Pin
J2
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
1
RotaryEncoder_Switch
SW7

Hacky hackpad design files

The KiCad project lives in the Thunder-god-adi/Hacky-hackpad repository on GitHub; these links point at the commit this page was built from.

Hacky hackpad: common questions

What microcontroller does the Hacky hackpad use?

The Hacky hackpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Hacky hackpad PCB?

The Hacky hackpad measures 65 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hacky hackpad?

9 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hacky hackpad design files?

From the Thunder-god-adi/Hacky-hackpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hacky hackpad design in my own project?

The repository has no license, so all rights stay with Thunder-god-adi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hacky hackpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards