TFUSBSERIAL01
ThunderFly-aerospace·TFUSBSERIAL01·hw/sch_pcb/TFUSBSERIAL01.kicad_pcb
About the TFUSBSERIAL01 PCB
TFUSBSERIAL01 is an open source PCB design by ThunderFly-aerospace, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30 × 30 mm, with 33 components from 19 distinct parts.
Other key parts include the USBLC6-2SC6 and FT231XQ. By type, the board carries 11 resistors, 6 modules, 5 capacitors, 4 diodes, 3 connectors and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
USB-C to serial converter with Pixhawk telemetry JST-GH connector
The converter is designed to service operations on UAVs. It respects the Pixhawk DS-009 connector standard.
Could be connected to both peripheral or FMUs The FMU and peripheral connectors are separated, therefore there is no need for a special RX/TX cross-cable Could be used for sniffing serial communication on telemetry links between autopilot and its peripheral (Both connectors could be used at once) Supports hardware flow control The power delivered from USB is protected from excess current possibly drawn by peripheral or FMU The accidental power from FMU to USB is protected by reverse…

Main components on the TFUSBSERIAL01
TFUSBSERIAL01 bill of materials (BOM)
33 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | FT231XQ | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 6 | HOLE_TF | dira_3mm | M1, M2, M3, M4, M5, M6 |
| 1 | USBC_USB4105-GF-A | USBC GCT_USB4105-GF-A | J1 |
| 2 | SM06B-GHS-TB | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J2, J3 |
| 1 | 350MA 350mA | Fuse_0805_2012Metric | F1 |
| 1 | SRL23 | D_SOD-323_HandSoldering | D1 |
| 1 | RED | LED_0603_1608Metric | D2 |
| 2 | GREEN | LED_0603_1608Metric | D3, D4 |
| 1 | BLM21PG300SN1D | L_0805_2012Metric | FB1 |
| 1 | 10NF 10nF | C_0603_1608Metric | C1 |
| 3 | 100NF 100nF | C_0603_1608Metric | C2, C4, C5 |
| 1 | 10UF 10uF | C_0603_1608Metric | C3 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R1, R2 |
| 1 | 4K7 4k7 | R_0603_1608Metric | R3 |
| 1 | 10K 10k | R_0603_1608Metric | R4 |
| 1 | 287R | R_0603_1608Metric | R5 |
| 2 | 130R | R_0603_1608Metric | R6, R7 |
| 4 | 100R | R_0603_1608Metric | R8, R9, R10, R11 |
TFUSBSERIAL01 design files
The KiCad project lives in the ThunderFly-aerospace/TFUSBSERIAL01 repository on GitHub; these links point at the commit this page was built from.
TFUSBSERIAL01: common questions
How big is the TFUSBSERIAL01 PCB?
The TFUSBSERIAL01 measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TFUSBSERIAL01?
33 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TFUSBSERIAL01 design files?
From the ThunderFly-aerospace/TFUSBSERIAL01 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TFUSBSERIAL01 design in my own project?
Yes, under the terms of its GPL-3.0 license, which ThunderFly-aerospace chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979