Walkin pir interface

ThunderSloth·walkin-pir-interface·hardware/pcb/kicad/WALKIN_PIR_IF.kicad_pcb

Walkin pir interface PCB layout, top view — open source board by ThunderSloth

About the Walkin pir interface PCB

Walkin pir interface is an open source PCB design by ThunderSloth, published on GitHub under the MIT license. It is a 2-layer board measuring 67.1 × 42.9 mm, with 18 components from 16 distinct parts.

Other key parts include the AQY212EH. By type, the board carries 4 resistors, 3 connectors, 3 diodes, 3 capacitors, 2 transistors and 1 IC.

It belongs with the power & battery and sensors designs in this gallery.

From the project

Battery-Powered PIR Motion Interface (Isolated Dry Contact)

The board detects motion using an AM312 PIR and signals the controller by closing a dry contact (DIN ↔ COM) through a PhotoMOS relay. It also provides a pass-through connection for an external NTC temperature probe, allowing temperature sensing to share the same cable run.

All lighting logic and power switching are handled by the controller; this board functions as a low-power, robust peripheral.

Walkin pir interface, from the project README
From the project README

Main components on the Walkin pir interface

AQY212EH

Walkin pir interface bill of materials (BOM)

18 components, 16 distinct parts.

QtyPartRefs
1
AQY212EH
U1
1
AO3401A
Q1
1
2N7000
Q2
1
Battery Terminal
J1
1
Probe Terminal
J2
1
XWA11V Terminal
J3
1
Current Test
JP1
1
AM312
S1
3
SMF12CA
D1, D2, D3
1
.1µF
C1
1
10µF
C2
1
1nF
C3
1
1MΩ
R1
1
1.5kΩ
R2
1
100Ω
R3
1
100kΩ
R4

Walkin pir interface design files

The KiCad project lives in the ThunderSloth/walkin-pir-interface repository on GitHub; these links point at the commit this page was built from.

Walkin pir interface: common questions

How big is the Walkin pir interface PCB?

The Walkin pir interface measures 67.1 × 42.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Walkin pir interface?

18 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Walkin pir interface design files?

From the ThunderSloth/walkin-pir-interface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Walkin pir interface design in my own project?

Yes, under the terms of its MIT license, which ThunderSloth chose for the repository.

Similar boards